What igniter fits my ICP furnace?

The correct replacement for ICP model WPG3602130LKB1 — OEM Assembly | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG3602130LKB1 — OEM Assembly | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WPG3602130LKB1 — OEM Assembly | Ships Today

Name: ICP Hot Surface Igniter for WPG3602130LKB1 — OEM Assembly | Ships Today
Brand: ICP
SKU: 1175974
Price: 48.04 USD
Availability: InStock

SKU: 1175974 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter assembly (part 1175974) is the ignition source for the gas section of your ICP WPG3602130LKB1. On a heat call, the control board sends voltage to the igniter, which glows to a high temperature and lights the burner gas. Igniters are brittle and wear out — they crack from thermal cycling, develop hairline fractures, or simply fail to reach ignition temperature. The classic symptom is a furnace that goes through its sequence but never lights, often locking out after several failed tries. Installing a fresh OEM igniter restores dependable ignition and proper burner sequencing. Handle the element only by its ceramic base — skin oils shorten its life.

Specifications

Spec	Value
OEM Part Number	1175974
Type	Hot Surface Igniter Assembly
Brand	ICP (Tempstar / Heil)
Function	Burner Ignition
Mounting	OEM Bracket with Lead

Compatibility

Direct factory replacement for the ICP / Tempstar / Heil WPG3602130LKB1 packaged unit. Match the bracket and connector style to your original igniter before installing.

Installation Guide

Safety First — Shut off gas and disconnect power, then verify zero voltage with a multimeter.
Access — Remove the furnace/burner service panel.
Document — Photograph the igniter position and wire routing before disconnecting.
Remove — Unplug the igniter lead and remove the mounting screw; lift the cracked element out without touching the silicon carbide tip.
Install — Seat the new igniter on its bracket, secure the screw, and reconnect the lead — handle by the ceramic base only.
Test — Restore gas and power, then watch a full heat cycle to confirm a clean light-off.

Signs You Need a Replacement

Furnace runs its sequence but burners never ignite
Igniter shows visible cracks or no longer glows
Repeated ignition lockouts after several attempts
Delayed ignition with a noticeable gas smell or rollout

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WPG3...

$48.04

Frequently Asked Questions

Does this Igniter fit my ICP WPG3602130LKB1 — OEM Assembly | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WPG3602130LKB1 — OEM Assembly | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WPG3602130LKB1 — OEM Assembly | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu