What igniter fits my ICP furnace?

The correct replacement for ICP model WPG3484090LKC1 — OEM Ignitor | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG3484090LKC1 — OEM Ignitor | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WPG3484090LKC1 — OEM Ignitor | Ships Today

Name: ICP Hot Surface Igniter for WPG3484090LKC1 — OEM Ignitor | Ships Today
Brand: ICP
SKU: 1177663
Price: 41.60 USD
Availability: InStock

SKU: 1177663 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part number 1177663) lights the burners in your ICP/Tempstar/Heil WPG3484090LKC1 packaged gas/electric unit. When the control board calls for heat, line voltage heats the igniter element to a glowing temperature that ignites the gas as the valve opens. Hot surface igniters are brittle and degrade with every cycle — the element develops hairline cracks, carbon buildup, or hot spots that eventually break the circuit. A failed igniter is one of the most common no-heat causes: the inducer and pressure switch prove, but the burners never light and the furnace locks out. Handle the new igniter only by its ceramic base, never the element.

Specifications

Spec	Value
Part Number	1177663
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Operating Voltage	120V
Function	Ignites burner gas on heat call

Compatibility

Direct OEM replacement for the hot surface igniter in the ICP/Tempstar/Heil WPG3484090LKC1 packaged gas/electric unit and compatible ICP-family furnaces using this ignitor. Match the mounting bracket and connector before installing.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter; shut off the gas supply.
Access — Remove the burner/control access panel.
Document — Photo the igniter position, bracket, and wire routing.
Remove — Unplug the igniter connector, remove the mounting screw(s), and lift out the old igniter without touching the element.
Install — Mount the new igniter by its ceramic base, set proper alignment to the burner, and reconnect the plug.
Test — Restore gas and power, then run a heat cycle and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

No heat with burners failing to light
Furnace locks out after the igniter should glow
Visible cracks, breaks, or carbon on the element
Igniter no longer glows or glows weakly

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WPG3...

$41.60

Frequently Asked Questions

Does this Igniter fit my ICP WPG3484090LKC1 — OEM Ignitor | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WPG3484090LKC1 — OEM Ignitor | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WPG3484090LKC1 — OEM Ignitor | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu