What igniter fits my ICP furnace?

The correct replacement for ICP model WPG3482130LKB1 — OEM Ignition Assembly | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG3482130LKB1 — OEM Ignition Assembly | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WPG3482130LKB1 — OEM Ignition Assembly | Ships Today

Name: ICP Hot Surface Igniter for WPG3482130LKB1 — OEM Ignition Assembly | Ships Today
Brand: ICP
SKU: 1175974
Price: 50.70 USD
Availability: InStock

SKU: 1175974 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter assembly (part #1175974) is the ignition source for the gas heat section of your ICP, Tempstar, or Heil WPG3482130LKB1 package unit. On a call for heat, the control board energizes the igniter until it glows hot enough to light the burners. Igniters are fragile and degrade with every heating cycle — a cracked or burned-out igniter is the single most common cause of furnace no-heat failures. This complete OEM assembly drops in with its factory bracket and connector for a reliable, code-correct repair.

Specifications

Spec	Value
Part Number	1175974
Type	Hot Surface Igniter Assembly
Brand	ICP / Tempstar / Heil
Configuration	Igniter with bracket and lead
Application	Gas furnace / package unit heat section

Compatibility

Direct OEM fit for the ICP/Tempstar/Heil WPG3482130LKB1 package unit. Because the assembly includes the factory bracket and connector, match part #1175974 to ensure correct mounting and plug alignment.

Installation Guide

Safety First — Disconnect power and shut off the gas supply, then verify zero voltage with a multimeter.
Access — Remove the burner/control access panel.
Document — Photograph the igniter position and connector routing before disconnecting.
Remove — Unplug the igniter lead and remove the mounting screw. Handle only by the ceramic base — never touch the silicon element.
Install — Mount the new igniter assembly, confirm proper spacing over the burner, and reconnect the lead per your photo.
Test — Restore power and gas, call for heat, and verify the igniter glows and the burners light.

Signs You Need a Replacement

No heat — igniter doesn't glow on a heat call
Visible cracks or breaks in the igniter element
Furnace locks out after failed ignition attempts
Igniter glows but burners fail to light consistently

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns on unused parts. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WPG3...

$50.70

Frequently Asked Questions

Does this Igniter fit my ICP WPG3482130LKB1 — OEM Ignition Assembly | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WPG3482130LKB1 — OEM Ignition Assembly | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WPG3482130LKB1 — OEM Ignition Assembly | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu