What igniter fits my ICP furnace?

The correct replacement for ICP model WPG3424060RKC1 — Silicon Nitride OEM | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG3424060RKC1 — Silicon Nitride OEM | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WPG3424060RKC1 — Silicon Nitride OEM | Ships Today

Name: ICP Hot Surface Igniter for WPG3424060RKC1 — Silicon Nitride OEM | Ships Today
Brand: ICP
SKU: 1177663
Price: 50.70 USD
Availability: InStock

SKU: 1177663 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

The ICP hot surface igniter (OEM #1177663) is the ignition source for the WPG3424060RKC1 package gas/electric unit. On a call for heat, the integrated control energizes this igniter; it heats to roughly 1,800–2,500°F and ignites the gas at the burners. Made from durable silicon nitride, it resists the thermal cracking and shock failures common to older silicon-carbide elements. When an igniter fails you typically see no ignition, the igniter glowing but no flame, repeated lockout, or a furnace that clicks and cycles without producing heat. This is a genuine OEM-grade replacement matched to the WPG3424060RKC1.

Specifications

Spec	Value
Part Number	1177663
Type	Hot Surface Igniter (Silicon Nitride)
Brand	ICP / Tempstar / Heil
Voltage	120V
Fitment	WPG3424060RKC1
Function	Burner ignition

Compatibility

Designed for the ICP / Tempstar / Heil WPG3424060RKC1 package gas/electric unit. The WPG3424060 platform shares this igniter across related package units; verify your part number against the failed component before ordering.

Installation Guide

Safety First — Disconnect power at the unit disconnect and shut off the gas supply. Verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter bracket and the two-wire connector before disconnecting.
Remove — Unplug the igniter harness, remove the mounting screw(s), and lift the old igniter out. Handle the ceramic element only by its base — never touch the hot surface.
Install — Seat the new igniter in the bracket, secure the screw, and reconnect the harness. Confirm proper spacing over the burner per spec.
Test — Restore gas and power, run a heat cycle, and confirm the igniter glows and ignites the burners cleanly.

Signs You Need a Replacement

Furnace fails to ignite or locks out after several attempts
Igniter glows but the burners never light
Visible cracks, chips, or white spots on the igniter element
No glow at all when a heat call is initiated

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WPG3...

$50.70

Frequently Asked Questions

Does this Igniter fit my ICP WPG3424060RKC1 — Silicon Nitride OEM | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WPG3424060RKC1 — Silicon Nitride OEM | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WPG3424060RKC1 — Silicon Nitride OEM | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu