ICP Hot Surface Igniter for WPG3364060RKC1 — OEM 1177663 | Ships Today

Overview

This OEM hot surface igniter (ICP part #1177663) is the ignition source for your ICP/Tempstar/Heil WPG3364060RKC1 gas furnace. When a heat call is received, the furnace control energizes the igniter; it glows white-hot and ignites the gas at the burners. A cracked element, no glow, or repeated ignition lockouts almost always trace back to a failed igniter. Hot surface igniters are brittle and wear out over normal cycling, making this one of the most common furnace replacement parts. Installing the exact OEM igniter guarantees correct resistance, glow temperature, and bracket fit.

Specifications

Compatibility

Direct OEM fit for the ICP/Tempstar/Heil WPG3364060RKC1 furnace and shared platform units using ignition assembly 1177663. Always confirm your model and part number before ordering.

Installation Guide

1. Safety First — Disconnect power at the furnace switch and breaker; verify zero voltage with a multimeter and shut off the gas supply.
2. Access — Remove the burner compartment service panel.
3. Document — Photograph the igniter wiring and mounting orientation before disconnecting.
4. Remove — Unplug the igniter connector and remove the mounting screw(s). Handle by the ceramic base only — never touch the element.
5. Install — Mount the new igniter so the element sits in the burner flame path, reconnect the harness, and reinstall the screw.
6. Test — Restore gas and power, initiate a heat call, and confirm the igniter glows and the burners light cleanly.

Signs You Need a Replacement

• Igniter does not glow on a heat call.
• Visible crack or break in the ceramic element.
• Furnace locks out after several failed ignition attempts.
• No heat despite the blower and control board cycling.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.