What igniter fits my ICP furnace?

The correct replacement for ICP model WPG3304040RKC1 — OEM Ignitor | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG3304040RKC1 — OEM Ignitor | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WPG3304040RKC1 — OEM Ignitor | Ships Today

Name: ICP Hot Surface Igniter for WPG3304040RKC1 — OEM Ignitor | Ships Today
Brand: ICP
SKU: 1177663
Price: 45.44 USD
Availability: InStock

SKU: 1177663 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM hot surface igniter (part number 1177663) is the ignition source for the ICP / Tempstar / Heil WPG3304040RKC1 packaged gas furnace. On a call for heat, the control board sends voltage to the igniter, which glows white-hot to light the main burners. Hot surface igniters are a wear item — the brittle silicon-carbide or silicon-nitride element degrades with every ignition cycle and eventually cracks, develops hairline fractures, or fails open. The result is no ignition, a furnace that locks out after several trial-for-ignition attempts, or intermittent no-heat calls. Replacing the igniter with the correct OEM part restores fast, reliable burner light-off.

Specifications

Spec	Value
Part Number	1177663
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil)
Function	Direct burner ignition
Fits Model	WPG3304040RKC1

Compatibility

Built for the ICP WPG3304040RKC1 and shared across many Tempstar, Heil, Comfortmaker, and Day & Night gas furnaces and packaged units using this hot surface igniter and connector. Match the mounting bracket and plug to your original before installing.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter; shut off the gas supply.
Access — Remove the burner/service panel to reach the igniter.
Document — Photograph the igniter position, bracket, and harness routing before disconnecting.
Remove — Unplug the igniter connector, remove the mounting screw, and carefully lift out the old element. Never touch the new element with bare fingers — skin oils cause early failure.
Install — Mount the new igniter, route the harness clear of the flame path, and reconnect per your photo.
Test — Restore gas and power, start a heat cycle, and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

No heat — burners never light
Furnace locks out after repeated ignition attempts
Igniter does not glow or glows dull/uneven
Visible cracks or hot spots on the igniter element

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WPG3...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP WPG3304040RKC1 — OEM Ignitor | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WPG3304040RKC1 — OEM Ignitor | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WPG3304040RKC1 — OEM Ignitor | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu