ICP Hot Surface Igniter for WPG3302060RKB1 — OEM 1175974 Igniter Assembly | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This is a genuine OEM hot surface igniter assembly (part number 1175974) for the ICP/Tempstar/Heil WPG3302060RKB1 packaged gas furnace. The hot surface igniter is the component that glows red-hot to ignite the gas as it enters the burners on each call for heat. Over time the silicon-carbide or silicon-nitride element develops hairline cracks and hot spots from thousands of heating cycles, which eventually causes it to fail open. When an igniter fails, the furnace will draw inducer and gas-valve sequence but never light, leaving you with cold air or a unit that locks out after several failed ignition attempts. Replacing a worn igniter is one of the most common no-heat repairs on this equipment.
Specifications
| Spec | Value |
|---|---|
| Part Number | 1175974 |
| Type | Hot Surface Igniter Assembly |
| Brand | ICP (Tempstar / Heil) |
| Fits Model | WPG3302060RKB1 |
| Application | Gas Furnace Ignition |
| Fitment | OEM Direct Replacement |
Compatibility
Designed as the factory-correct igniter assembly for the ICP/Tempstar/Heil WPG3302060RKB1 packaged gas unit. Always confirm your existing part number and bracket orientation before installing.
Installation Guide
- Safety First — Disconnect power at the unit disconnect and shut off the gas supply. Verify zero voltage with a multimeter before proceeding.
- Access — Remove the furnace service / blower-compartment panel to reach the burner assembly.
- Document — Photograph the igniter bracket position and wire routing before disconnecting.
- Remove — Unplug the igniter harness connector and remove the mounting screw(s). Handle the old igniter only by its ceramic base — never touch the element.
- Install — Mount the new 1175974 igniter in the same position, handling only the ceramic base, and reconnect the harness per your photo.
- Test — Restore gas and power, then run a heat cycle and confirm the igniter glows and the burners light promptly.
Signs You Need a Replacement
- Furnace runs the inducer but never lights the burners.
- Unit locks out after 3 failed ignition attempts (no glow visible).
- Visible cracks, blistering, or white deposits on the igniter element.
- Intermittent ignition — sometimes lights, sometimes drops to cold air.
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days