What igniter fits my ICP furnace?

The correct replacement for ICP model WPG3244060RKC1 — Direct-Fit OEM | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG3244060RKC1 — Direct-Fit OEM | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WPG3244060RKC1 — Direct-Fit OEM | Ships Today

Name: ICP Hot Surface Igniter for WPG3244060RKC1 — Direct-Fit OEM | Ships Today
Brand: ICP
SKU: 1177663
Price: 45.44 USD
Availability: InStock

SKU: 1177663 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM hot surface igniter (part number 1177663) provides reliable ignition for the gas burners in the ICP Tempstar Heil WPG3244060RKC1. On each heat call, the control board energizes the igniter, which glows red-hot to light the burners before the gas valve opens. Hot surface igniters are brittle and degrade with every cycle, making them one of the most frequent no-heat failure points in modern furnaces.

Specifications

Spec	Value
Part Number	1177663
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil)
Application	Gas furnace burner ignition
Mounting	Direct-fit OEM bracket

Compatibility

A direct-fit replacement for the ICP / Tempstar / Heil WPG3244060RKC1 and other units specifying OEM part 1177663. Confirm the bracket style and connector against the failed igniter before installing.

Installation Guide

Safety First — Disconnect power and shut off the gas supply, then verify zero voltage with a multimeter.
Access — Remove the burner compartment panel to expose the igniter.
Document — Photograph the igniter position, bracket orientation, and wire routing.
Remove — Unplug the igniter harness and unscrew the old igniter, handling it only by the ceramic base — never touch the silicon element.
Install — Mount the new igniter without contacting the hot surface element, then reconnect the harness.
Test — Restore gas and power and confirm the igniter glows and lights the burners on a heat call.

Signs You Need a Replacement

No heat with the blower running but burners never lighting
Visible crack or break in the igniter element
Igniter fails to glow on a heat call
Repeated ignition lockouts at the control board

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WPG3...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP WPG3244060RKC1 — Direct-Fit OEM | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WPG3244060RKC1 — Direct-Fit OEM | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WPG3244060RKC1 — Direct-Fit OEM | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu