ICP Hot Surface Igniter for WPG3242060LKB1 — OEM Igniter Assembly | Ships Today

Overview

This OEM hot surface igniter assembly (part 1175974) is what lights the burners in your ICP WPG3242060LKB1 gas unit. On a call for heat, the control board sends voltage to the igniter, which glows red-hot and ignites the gas as the valve opens. The complete assembly includes the igniter element, mounting bracket, and lead connector for a true plug-in replacement. Hot surface igniters are brittle and wear out with thermal cycling — they are one of the most common no-heat failures. A cracked or burned-out igniter never reaches ignition temperature, so the gas valve stays closed and the furnace locks out without lighting.

Specifications

Compatibility

Designed as the direct OEM replacement igniter assembly for the ICP WPG3242060LKB1 package unit, also sold under the Heil, Tempstar, and Comfortmaker labels. Confirm the bracket and connector match your existing igniter before installing.

Installation Guide

1. Safety First — Disconnect power and shut off the gas supply, then verify zero voltage with a multimeter.
2. Access — Remove the burner-compartment service panel.
3. Document — Photograph the igniter mounting position and wire routing before disconnecting.
4. Remove — Unplug the igniter lead and remove the mounting screw. Handle the old igniter by the bracket only — never touch the ceramic element.
5. Install — Mount the new igniter assembly, taking care not to touch the element with bare fingers, and reconnect the lead per your photo.
6. Test — Restore gas and power, call for heat, and confirm the igniter glows and the burners light cleanly.

Signs You Need a Replacement

• No heat and burners never light
• Igniter does not glow on a heat call
• Visible cracks or breaks in the ceramic element
• Furnace locks out after several failed ignition attempts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.