What igniter fits my ICP furnace?

The correct replacement for ICP model WFSR120D060A2 — OEM Furnace Ignition Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFSR120D060A2 — OEM Furnace Ignition Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WFSR120D060A2 — OEM Furnace Ignition Kit | Ships Today

Name: ICP Hot Surface Igniter for WFSR120D060A2 — OEM Furnace Ignition Kit | Ships Today
Brand: ICP
SKU: 1184324
Price: 45.44 USD
Availability: InStock

SKU: 1184324 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM ignition kit pairs the hot surface igniter (part number 1176919) with its mounting bracket (part number 1184324) for the ICP / Tempstar / Heil WFSR120D060A2 gas furnace. The hot surface igniter is a silicon-carbide or silicon-nitride element that glows red-hot on each call for heat to ignite the burner gas. It is the single most common furnace ignition failure point because the brittle element degrades with every heating cycle and eventually cracks. When it fails, the furnace inducer and gas valve sequence normally but the burners never light, leaving you with no heat. The matching bracket ensures correct positioning relative to the burner flame path.

Specifications

Spec	Value
Igniter Part Number	1176919
Bracket Part Number	1184324
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil)
Voltage	120V
Fits Model	WFSR120D060A2
Fitment	OEM exact-fit

Compatibility

Designed for the ICP/Tempstar/Heil WFSR120D060A2 gas furnace. The same igniter and bracket also service the closely related WFSR120D060A1 revision. Verify against your furnace's parts list before ordering.

Installation Guide

Safety First — Shut off gas and disconnect power; verify zero voltage with a multimeter.
Access — Remove the burner-compartment service panel.
Document — Photo the igniter wiring and bracket position before disconnecting.
Remove — Unplug the igniter connector, unscrew the bracket, and lift the assembly out — handle the element by the ceramic base only.
Install — Mount the new bracket and igniter, never touching the element with bare fingers, and reconnect the harness.
Test — Restore gas and power, then watch a full ignition cycle to confirm the burners light.

Signs You Need a Replacement

Furnace inducer runs but burners never ignite
Igniter no longer glows orange/white on a call for heat
Visible cracks or white powdery flaking on the element
Intermittent no-heat lockouts after several cycles

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WFSR...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP WFSR120D060A2 — OEM Furnace Ignition Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFSR120D060A2 — OEM Furnace Ignition Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFSR120D060A2 — OEM Furnace Ignition Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu