What igniter fits my ICP furnace?

The correct replacement for ICP model WFSR100C060A2 — With Mounting Bracket | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFSR100C060A2 — With Mounting Bracket | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WFSR100C060A2 — With Mounting Bracket | Ships Today

Name: ICP Hot Surface Igniter for WFSR100C060A2 — With Mounting Bracket | Ships Today
Brand: ICP
SKU: 1184324
Price: 48.04 USD
Availability: InStock

SKU: 1184324 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the genuine OEM hot surface igniter kit for the ICP/Tempstar/Heil WFSR100C060A2 gas furnace. It includes the igniter (part 1176919) and its mounting bracket (part 1184324). The hot surface igniter glows to ignite the gas at each heat cycle; because it is repeatedly heated and cooled, it is one of the most common wear items in a modern furnace. A cracked or aged igniter causes ignition failure and no-heat lockouts.

Specifications

Spec	Value
Part Number	1176919 (igniter), 1184324 (bracket)
Type	Hot surface igniter
Brand	ICP / Tempstar / Heil
Includes	Igniter and mounting bracket
Element	Silicon carbide / nitride hot surface

Compatibility

Direct OEM replacement for the WFSR100C060A2 furnace and related ICP-family models using this igniter and bracket assembly. Match part numbers 1176919 and 1184324 and confirm the connector style before installing. Handle the igniter element by the ceramic base only — skin oils shorten its life.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel to expose the igniter at the burner assembly.
Document — Photograph the igniter position, bracket orientation, and wire routing before disconnecting.
Remove — Unplug the igniter connector, remove the bracket screw, and carefully withdraw the fragile igniter element.
Install — Mount the new igniter on the included bracket, position it at the correct gap to the burner, and reconnect the lead per your photo. Touch only the ceramic base.
Test — Restore power and watch a full ignition cycle; confirm the element glows bright orange and lights the burners.

Signs You Need a Replacement

Furnace clicks but the igniter never glows
Visible crack, chip, or break in the igniter element
Repeated ignition lockouts after several attempts
Weak or uneven glow that fails to light the gas

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WFSR...

$48.04

Frequently Asked Questions

Does this Igniter fit my ICP WFSR100C060A2 — With Mounting Bracket | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFSR100C060A2 — With Mounting Bracket | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFSR100C060A2 — With Mounting Bracket | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu