What igniter fits my ICP furnace?

The correct replacement for ICP model WFSR040A030A2 — With Bracket | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFSR040A030A2 — With Bracket | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WFSR040A030A2 — With Bracket | Ships Today

Name: ICP Hot Surface Igniter for WFSR040A030A2 — With Bracket | Ships Today
Brand: ICP
SKU: 1184324
Price: 45.44 USD
Availability: InStock

SKU: 1184324 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part #1176919) lights the gas burners on your ICP/Heil/Tempstar WFSR040A030A2 furnace. On each call for heat the control board energizes the igniter, which glows red-hot to ignite the gas as the valve opens. Igniters are a wear item — the brittle silicon-carbide or nitride element degrades with every heating cycle and eventually cracks, leaving the furnace unable to light. This kit includes the mounting bracket (part #1184324) for correct positioning in the burner flame path.

Specifications

Spec	Value
Part Number	1176919 (Igniter), 1184324 (Bracket)
Type	Hot Surface Igniter
Brand	ICP / Heil / Tempstar
Function	Burner ignition
Mounting	Igniter bracket included

Compatibility

Direct-fit OEM replacement for the ICP/Heil/Tempstar WFSR040A030A2 furnace and related WFSR-series models that use the same burner igniter assembly. Confirm the igniter style and bracket pattern against your existing part before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter. Shut off the gas supply.
Access — Remove the furnace burner compartment service panel.
Document — Photograph the igniter position and wire routing before disconnecting.
Remove — Unplug the igniter connector and unscrew the bracket. Handle only by the ceramic base — never touch the fragile element.
Install — Mount the new igniter with the included bracket so it sits correctly in the burner flame path, then reconnect the wiring per your photo.
Test — Restore gas and power, then watch a full cycle: the igniter should glow bright and light the burners cleanly.

Signs You Need a Replacement

Furnace will not light despite the inducer running
Igniter does not glow, or glows weakly
Visible cracks or breaks in the igniter element
Furnace locks out after several failed ignition attempts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WFSR...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP WFSR040A030A2 — With Bracket | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFSR040A030A2 — With Bracket | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFSR040A030A2 — With Bracket | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu