What igniter fits my ICP furnace?

The correct replacement for ICP model WFSR040A030A1 — with Bracket | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFSR040A030A1 — with Bracket | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WFSR040A030A1 — with Bracket | Ships Today

Name: ICP Hot Surface Igniter for WFSR040A030A1 — with Bracket | Ships Today
Brand: ICP
SKU: 1184324
Price: 50.64 USD
Availability: InStock

SKU: 1184324 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM ICP hot surface igniter (part #1176919) with its matching mounting bracket (part #1184324) is the component that ignites the burners on your WFSR040A030A1 furnace. On a call for heat, the control board sends voltage to the igniter, which glows white-hot to light the gas as it flows from the burners. Hot surface igniters are brittle and degrade over time — they are the most common no-heat failure point. When the igniter cracks or burns out, the furnace will go through its sequence, the inducer runs, but the burners never light and the system locks out. A no-glow igniter or one that glows but fails to ignite means it's time for replacement. This kit includes both the igniter and the bracket for a complete, correct fit.

Specifications

Spec	Value
Igniter Part Number	1176919
Bracket Part Number	1184324
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Includes	Igniter + Mounting Bracket
Fit	OEM Direct Replacement

Compatibility

Directly fits ICP model WFSR040A030A1 and the matching Tempstar, Heil, and Comfortmaker furnace platforms that use this hot surface igniter and bracket assembly. Handle the igniter element only by its base — skin oils and rough handling shorten its life.

Installation Guide

Safety First — Disconnect power at the breaker and verify zero voltage with a multimeter before servicing.
Access — Remove the furnace burner-compartment service panel.
Document — Photograph the igniter position and wire routing before disconnecting.
Remove — Unplug the igniter lead, remove the bracket mounting screw, and lift out the old igniter assembly.
Install — Mount the new igniter and bracket, handling the element by its ceramic base only, then reconnect the lead.
Test — Restore power and run a heat cycle to confirm the igniter glows and the burners light.

Signs You Need a Replacement

Furnace runs its sequence but burners never ignite
Igniter does not glow on a call for heat
Visible cracks, chips, or hot spots on the igniter element
Furnace locks out after several failed ignition attempts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WFSR...

$50.64

Frequently Asked Questions

Does this Igniter fit my ICP WFSR040A030A1 — with Bracket | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFSR040A030A1 — with Bracket | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFSR040A030A1 — with Bracket | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu