What igniter fits my ICP furnace?

The correct replacement for ICP model WFMR090C048A1 — Furnace HSI | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFMR090C048A1 — Furnace HSI | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WFMR090C048A1 — Furnace HSI | Ships Today

Name: ICP Hot Surface Igniter for WFMR090C048A1 — Furnace HSI | Ships Today
Brand: ICP
SKU: 1176919
Price: 42.84 USD
Availability: InStock

SKU: 1176919 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part #1176919) lights the burners on your ICP/Tempstar/Heil WFMR090C048A1 gas furnace. On each heat call the control board sends 120V to the igniter, which glows white-hot to ignite the gas as the valve (related part #1176929) opens. Hot surface igniters are fragile and degrade over thousands of cycles — a cracked or worn igniter is the leading cause of no-heat calls. Symptoms include the furnace cycling the inducer and pressure switch but never lighting, then locking out. A genuine OEM igniter restores fast, dependable ignition.

Specifications

Spec	Value
Part Number	1176919
Related Valve Part	1176929 (HSI Snap Valve, 36J24618)
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Voltage	120V

Compatibility

Designed for the ICP/Tempstar/Heil WFMR090C048A1 gas furnace and other WFMR090-series units. Order the matching valve part #1176929 if your snap-mount gas valve assembly also needs service.

Installation Guide

Safety First — Disconnect power at the switch and breaker, then verify zero voltage with a multimeter. Shut off the gas supply.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter bracket position and wiring before disconnecting.
Remove — Unplug the igniter connector and remove the mounting screw — handle only by the ceramic base, never the silicon-carbide element.
Install — Position the new igniter at the correct burner-flame location, secure the bracket, and reconnect the lead.
Test — Restore gas and power, then run a heat cycle to confirm the igniter glows and ignites the burners promptly.

Signs You Need a Replacement

Furnace runs the inducer but never lights, then locks out
Igniter shows no glow during a heat call
Visible cracks or hot spots on the igniter element
Open or out-of-range resistance reading across the igniter

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WFMR...

$42.84

Frequently Asked Questions

Does this Igniter fit my ICP WFMR090C048A1 — Furnace HSI | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFMR090C048A1 — Furnace HSI | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFMR090C048A1 — Furnace HSI | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu