What igniter fits my ICP furnace?

The correct replacement for ICP model WFMR090B042B1 — Silicon Nitride HSI Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFMR090B042B1 — Silicon Nitride HSI Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WFMR090B042B1 — Silicon Nitride HSI Kit | Ships Today

Name: ICP Hot Surface Igniter for WFMR090B042B1 — Silicon Nitride HSI Kit | Ships Today
Brand: ICP
SKU: 1183455
Price: 44.20 USD
Availability: InStock

SKU: 1183455 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (HSI) is the ignition source for the ICP/Tempstar/Heil WFMR090B042B1 gas furnace. On a heat call, the control board energizes the igniter, which glows to roughly 2,000°F and lights the gas burners. The kit includes the silicon-nitride igniter element (OEM 1176919) and its mounting bracket (OEM 1183455). A cracked or open igniter is a leading cause of no-heat failures: the furnace purges, fails to light, retries, and finally locks out. Installing a fresh igniter restores dependable single-attempt ignition and ends nuisance lockouts.

Specifications

Spec	Value
OEM Part Number	1176919 (Igniter)
Included Bracket	1183455 (Igniter Bracket)
Type	Hot Surface Igniter (HSI)
Element	Silicon Nitride
Brand	ICP / Tempstar / Heil
Fits Model	WFMR090B042B1
Application	Gas Furnace Ignition

Compatibility

Designed for the ICP-family WFMR090B042B1 gas furnace and interchangeable across the ICP, Tempstar, Heil, and Comfortmaker models that share this ignition platform. Confirm the part number against your unit's rating plate before installing.

Installation Guide

Safety First — Shut off the gas and disconnect electrical power at the furnace switch and breaker; verify zero voltage with a multimeter.
Access — Remove the furnace burner-compartment service panel.
Document — Photograph the igniter wiring and bracket position before disconnecting.
Remove — Unplug the igniter connector, remove the bracket screw(s), and withdraw the old igniter without touching the element.
Install — Mount the new igniter and bracket, handling the element by the ceramic base only, and reconnect the plug per your photo.
Test — Restore gas and power, run a heat cycle, and confirm the igniter glows and lights the burners on the first attempt.

Signs You Need a Replacement

Furnace fails to light and locks out after several tries
Igniter is visibly cracked, blistered, or no longer glows
Intermittent no-heat calls, especially in cold weather
Resistance reads open or out of spec on a multimeter

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WFMR...

$44.20

Frequently Asked Questions

Does this Igniter fit my ICP WFMR090B042B1 — Silicon Nitride HSI Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFMR090B042B1 — Silicon Nitride HSI Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFMR090B042B1 — Silicon Nitride HSI Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu