What igniter fits my ICP furnace?

The correct replacement for ICP model WFMR070A024A1 — HSI Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFMR070A024A1 — HSI Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WFMR070A024A1 — HSI Kit | Ships Today

Name: ICP Hot Surface Igniter for WFMR070A024A1 — HSI Kit | Ships Today
Brand: ICP
SKU: 1176919
Price: 50.70 USD
Availability: InStock

SKU: 1176919 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part #1176919, IGNITER) for the ICP WFMR070A024A1 furnace heats to a glowing temperature on each heat call to light the gas at the burners. It pairs with the snap-on HSI valve assembly (part #1176929, VALVE N HSI SNAP WR 36J24618). Hot surface igniters are brittle and degrade with thermal cycling — a cracked or worn igniter is the most common cause of a furnace that clicks and runs the inducer but never lights, then locks out on failed ignition. Installing a fresh OEM igniter restores fast, reliable burner ignition.

Specifications

Spec	Value
Igniter Part Number	1176919
Valve Assembly	1176929 (HSI Snap, 36J24618)
Type	Hot Surface Igniter (HSI)
Brand	ICP (Tempstar / Heil)
Mounting	Snap-on bracket
Fitment	OEM Replacement

Compatibility

Designed for the ICP/Tempstar/Heil WFMR070A024A1 furnace and other models using OEM igniter 1176919 with the 1176929 snap valve assembly. Confirm your igniter style and bracket before installing.

Installation Guide

Safety First — Disconnect power at the breaker and verify zero voltage with a multimeter. Shut off the gas supply.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter position and wiring before disconnecting. Never touch the new igniter element with bare fingers — skin oils cause hot spots and early failure.
Remove — Unplug the igniter connector, remove the mounting screw, and lift out the old igniter.
Install — Snap the new igniter into the bracket, set the correct gap to the burner, and reconnect the lead per your photo.
Test — Restore gas and power, call for heat, and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

Inducer runs but burners never ignite
Furnace locks out after several failed ignition attempts
Igniter shows visible cracks or no longer glows
Open circuit / infinite resistance measured across the igniter

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WFMR...

$50.70

Frequently Asked Questions

Does this Igniter fit my ICP WFMR070A024A1 — HSI Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFMR070A024A1 — HSI Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFMR070A024A1 — HSI Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu