What igniter fits my ICP furnace?

The correct replacement for ICP model WFML110C048B3 — OEM Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFML110C048B3 — OEM Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WFML110C048B3 — OEM Kit | Ships Today

Name: ICP Hot Surface Igniter for WFML110C048B3 — OEM Kit | Ships Today
Brand: ICP
SKU: 1183455
Price: 55.84 USD
Availability: InStock

SKU: 1183455 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter assembly is a direct fit for ICP Tempstar Heil furnace WFML110C048B3. It covers the complete ignition group — igniter (part #1176919), igniter mounting bracket (part #1183455), and the HSI snap/valve component (part #1176929, 36J24618). The igniter glows red-hot when the control board calls for heat, igniting the gas at the burners. Because it is the most cycled component in the ignition system, the silicon element eventually develops hairline cracks and stops glowing. Typical failure signs are a furnace that runs the inducer and waits but never lights, repeated lockouts after three or four ignition attempts, or a visibly cracked or whitened igniter element.

Specifications

Spec	Value
Igniter Part Number	1176919
Bracket Part Number	1183455
HSI Snap Part Number	1176929 (36J24618)
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Voltage	120V
Fit	OEM Direct Replacement

Compatibility

Designed for ICP Tempstar Heil model WFML110C048B3 and shared across ICP-family gas furnaces (Comfortmaker, Arcoaire, KeepRite) that use this 120V hot surface ignition platform. Confirm the existing igniter style and bracket footprint before installing.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, and shut off the gas; verify zero voltage with a multimeter.
Access — Remove the furnace burner service panel.
Document — Photograph the igniter wiring, plug location, and bracket orientation.
Remove — Unplug the igniter harness, remove the bracket screws, and lift the old igniter out — handle the new element by the ceramic base only, never the silicon tip.
Install — Mount the new igniter and bracket, reconnect the harness per your photo.
Test — Restore power and gas, then watch a full ignition cycle to confirm a steady glow and burner light-off.

Signs You Need a Replacement

Inducer runs but burners never ignite
Furnace locks out after 3–4 failed ignition tries
Igniter does not glow or glows weakly
Visible cracks, blistering, or white spots on the element

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WFML...

$55.84

Frequently Asked Questions

Does this Igniter fit my ICP WFML110C048B3 — OEM Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFML110C048B3 — OEM Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFML110C048B3 — OEM Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu