What igniter fits my ICP furnace?

The correct replacement for ICP model WFML090C048B3 — Direct OEM | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFML090C048B3 — Direct OEM | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WFML090C048B3 — Direct OEM | Ships Today

Name: ICP Hot Surface Igniter for WFML090C048B3 — Direct OEM | Ships Today
Brand: ICP
SKU: 1183455
Price: 48.04 USD
Availability: InStock

SKU: 1183455 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part #1176919) is the ignition source for your ICP Tempstar Heil WFML090C048B3 gas furnace. On each call for heat the control board energizes the igniter, which heats to a glowing temperature and lights the burners as the gas valve opens. Hot surface igniters are brittle and degrade over time — micro-cracks, contamination, or simple element fatigue cause them to fail to reach ignition temperature. The result is a furnace that cycles but never lights. This listing covers the igniter (1176919) and ships with the matching OEM igniter mounting bracket (1183455) for a correct, repeatable flame position.

Specifications

Spec	Value
Part Number	1176919 (Igniter)
Includes	1183455 Igniter Bracket
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil)
Function	Burner Ignition
Fit	OEM Replacement

Compatibility

Direct OEM fit for the ICP Tempstar Heil WFML090C048B3 furnace and other ICP-family models using this igniter and bracket assembly. Because hot surface igniters are timing- and position-sensitive, replacing with the exact OEM part and bracket ensures reliable light-off and correct flame proving.

Installation Guide

Safety First — Shut off gas and disconnect power; verify zero voltage with a multimeter before servicing.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter position, bracket orientation, and the wire harness routing.
Remove — Unplug the igniter connector and unscrew the igniter/bracket from the burner assembly. Handle by the ceramic base only — never touch the element.
Install — Mount the new igniter and bracket in the identical position, then reconnect the harness.
Test — Restore gas and power, then watch a full heating cycle to confirm glow, light-off, and stable flame.

Signs You Need a Replacement

Furnace clicks and tries to ignite but the burners never light.
No visible glow from the igniter during the ignition sequence.
Visible cracks, chips, or white powdery deposits on the igniter element.
Control board lockout after several failed ignition attempts.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WFML...

$48.04

Frequently Asked Questions

Does this Igniter fit my ICP WFML090C048B3 — Direct OEM | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFML090C048B3 — Direct OEM | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFML090C048B3 — Direct OEM | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu