What igniter fits my ICP furnace?

The correct replacement for ICP model WFML070A024B2 - OEM Furnace Ignitor | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFML070A024B2 - OEM Furnace Ignitor | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WFML070A024B2 - OEM Furnace Ignitor | Ships Today

Name: ICP Hot Surface Igniter for WFML070A024B2 - OEM Furnace Ignitor | Ships Today
Brand: ICP
SKU: 1183455
Price: 50.70 USD
Availability: InStock

SKU: 1183455 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter assembly (igniter 1176919 with bracket 1183455 and snap-fit retainer 1176929) provides reliable ignition for your ICP WFML070A024B2 gas furnace. On a call for heat, the control board sends line voltage to the igniter, which glows red-hot to ignite the gas at the burners. Hot surface igniters are brittle and degrade with every heating cycle, so they are one of the most common no-heat failure points. A cracked or worn igniter will fail to glow, leaving the furnace to lock out after several failed ignition attempts. Never touch the igniter element with bare fingers - skin oils create hot spots that shorten its life.

Specifications

Spec	Value
Igniter Part Number	1176919
Bracket Part Number	1183455
Snap-Fit / Retainer	1176929
Type	Hot Surface Igniter (HSI)
Brand	ICP (Tempstar / Heil)
Application	Gas Furnace Burner Ignition

Compatibility

Direct OEM fit for the ICP / Tempstar / Heil WFML070A024B2 gas furnace. The included mounting bracket and snap-fit retainer ensure correct positioning over the burner assembly.

Installation Guide

Safety First - Shut off the gas supply and disconnect power, then verify zero voltage with a multimeter.
Access - Remove the furnace burner-compartment service panel.
Document - Photograph the igniter position and wire routing before disconnecting.
Remove - Unplug the igniter connector and remove the mounting screw, handling the old igniter by its ceramic base only.
Install - Mount the new igniter and bracket, keeping fingers off the element, and reconnect the plug.
Test - Restore gas and power, then watch a full ignition cycle to confirm the igniter glows and lights the burners.

Signs You Need a Replacement

Igniter does not glow on a call for heat
Furnace locks out after repeated ignition attempts
Visible cracks or chips in the ceramic element
Intermittent no-heat that clears after a reset

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WFML...

$50.70

Frequently Asked Questions

Does this Igniter fit my ICP WFML070A024B2 - OEM Furnace Ignitor | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFML070A024B2 - OEM Furnace Ignitor | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFML070A024B2 - OEM Furnace Ignitor | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu