What igniter fits my ICP furnace?

The correct replacement for ICP model WFHR120D060A1 — OEM 1176919 Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFHR120D060A1 — OEM 1176919 Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WFHR120D060A1 — OEM 1176919 Kit | Ships Today

Name: ICP Hot Surface Igniter for WFHR120D060A1 — OEM 1176919 Kit | Ships Today
Brand: ICP
SKU: 1177210
Price: 50.70 USD
Availability: InStock

SKU: 1177210 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM hot surface igniter (part number 1176919) ignites the burners on the ICP / Tempstar / Heil WFHR120D060A1 gas furnace. On each heat call the control board energizes the igniter, which glows white-hot to light the gas as the valve opens. The matching igniter mounting bracket (1177210) ensures correct flame alignment, and the slow-open HSI gas valve (1177204, WR 36J24510) is available for complete ignition-system service. Hot surface igniters are brittle and the leading cause of no-heat calls — handle the element only by its ceramic base, never the glow tip.

Specifications

Spec	Value
Igniter Part Number	1176919
Bracket Part Number	1177210
Gas Valve Part Number	1177204 (WR 36J24510, slow-open HSI)
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Fitment	OEM

Compatibility

Engineered for the ICP Tempstar Heil WFHR120D060A1 gas furnace and other ICP-family models using the 1176919 hot surface igniter. Confirm your existing igniter style and bracket footprint before ordering.

Installation Guide

Safety First — Disconnect power and shut off the gas supply, then verify zero voltage with a multimeter.
Access — Remove the burner-compartment service panel.
Document — Photograph the igniter wiring, bracket position, and gas valve connections.
Remove — Unplug the igniter harness, unscrew the bracket, and lift the old igniter out — never touch the ceramic glow element with bare fingers.
Install — Mount the new igniter on its bracket at the correct depth/alignment over the burner, then reconnect wiring per your photo.
Test — Restore gas and power, initiate a heat call, and confirm the igniter glows and burners light within the normal sequence.

Signs You Need a Replacement

No heat — blower runs but burners never light
Igniter does not glow, or glows weakly/unevenly
Visible cracks, blistering, or white flaking on the element
Furnace locks out after several failed ignition attempts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WFHR...

$50.70

Frequently Asked Questions

Does this Igniter fit my ICP WFHR120D060A1 — OEM 1176919 Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFHR120D060A1 — OEM 1176919 Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFHR120D060A1 — OEM 1176919 Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu