What igniter fits my ICP furnace?

The correct replacement for ICP model WFEL070A024A1 — Direct-Fit HSI Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFEL070A024A1 — Direct-Fit HSI Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WFEL070A024A1 — Direct-Fit HSI Kit | Ships Today

Name: ICP Hot Surface Igniter for WFEL070A024A1 — Direct-Fit HSI Kit | Ships Today
Brand: ICP
SKU: 1183455
Price: 45.44 USD
Availability: InStock

SKU: 1183455 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (HSI) is the direct-fit ignition component for the ICP Tempstar/Heil WFEL070A024A1 gas furnace. The hot surface igniter energizes at the start of each heating cycle, glowing bright orange to light the gas as it leaves the burners. It runs on 120V line voltage and is the most common single cause of no-heat service calls on this furnace platform. This listing covers the complete ignition group for the model, including OEM igniter 1176919, igniter bracket 1183455, and the matching HSI/valve assembly 36J24618 (OEM 1176929). When the igniter cracks, carbon-fouls, or loses continuity, the furnace locks out and the control board flashes an ignition-failure fault code.

Specifications

Spec	Value
Part Numbers	1176919 (igniter), 1183455 (bracket), 1176929 (HSI valve assy)
Type	Hot Surface Igniter (HSI)
Brand	ICP / Tempstar / Heil
Voltage	120V
Fit	OEM Direct Replacement

Compatibility

Engineered for the ICP Tempstar/Heil WFEL070A024A1 gas furnace and shared platform variants within the ICP family. Confirm your existing igniter part number before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, shut off gas, and verify zero voltage with a multimeter.
Access — Remove the burner-compartment service panel.
Document — Photograph the igniter wiring and bracket position before disconnecting.
Remove — Unplug the igniter connector, remove the mounting screw, and lift the old igniter and bracket clear of the burner. Handle the new ceramic element by the bracket only — never touch the silicon-carbon surface.
Install — Mount the new igniter and bracket, reconnect the plug, and confirm proper gap and alignment over the burner.
Test — Restore gas and power, start a heat call, and confirm the igniter glows and the burners light within the trial-for-ignition window.

Signs You Need a Replacement

Furnace blower runs but burners never light (no heat).
Igniter does not glow, or glows weak/uneven.
Visible cracks or white/gray fouling on the ceramic element.
Control board flashing an ignition-failure or lockout fault code.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WFEL...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP WFEL070A024A1 — Direct-Fit HSI Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFEL070A024A1 — Direct-Fit HSI Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFEL070A024A1 — Direct-Fit HSI Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu