ICP Hot Surface Igniter for WFAR120D066B2 — OEM Kit with Bracket | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This hot surface igniter kit is the factory replacement for the ICP/Tempstar/Heil WFAR120D066B2 furnace and includes both the igniter (OEM part number 1176919) and its mounting bracket (OEM part number 1184324). The hot surface igniter glows red-hot when energized to ignite the burner gas on each heating cycle. Igniters are the single most common furnace failure — the silicon nitride or carbide element grows brittle with thousands of heat cycles and eventually cracks, leaving the furnace unable to light. When the igniter fails the furnace will draft and call for heat but never ignite, often locking out after several failed trial-for-ignition attempts. Installing the matched bracket ensures correct gap and alignment to the burner flame path.
Specifications
| Spec | Value |
|---|---|
| Igniter Part Number | 1176919 |
| Bracket Part Number | 1184324 |
| Type | Hot Surface Igniter |
| Brand | ICP (Tempstar / Heil) |
| Application | Gas Furnace Ignition |
| Fits Model | WFAR120D066B2 |
Compatibility
Engineered as the OEM replacement for the ICP/Tempstar/Heil WFAR120D066B2 furnace. The included bracket (1184324) matches the original mounting so the igniter sits at the correct depth and gap in the burner assembly. Confirm the connector style against your existing igniter before installing.
Installation Guide
- Safety First — Disconnect power at the breaker and shut off the gas supply; verify zero voltage with a multimeter.
- Access — Remove the burner compartment door.
- Document — Photograph the igniter position, bracket orientation, and wire routing before disconnecting.
- Remove — Unplug the igniter connector and unscrew the old igniter and bracket. Handle only by the ceramic base — never touch the element.
- Install — Mount the new igniter on its bracket, position it per your photo, and reconnect the harness without touching the element surface.
- Test — Restore gas and power, then watch a full ignition cycle to confirm the igniter glows and lights the burners.
Signs You Need a Replacement
- Furnace drafts and clicks but never lights
- Igniter does not glow when energized
- Visible crack, blistering, or white residue on the element
- Furnace locks out after repeated failed ignition attempts
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days