ICP Hot Surface Igniter for WFAR100C060C1 – with Bracket | Ships Today

Overview

The hot surface igniter lights the burners on your ICP / Heil / Tempstar WFAR100C060C1 furnace. On each call for heat it glows red-hot to ignite the gas; over time the brittle silicon-carbide element cracks or wears out and the furnace stops producing heat. Common failure symptoms include no ignition, the furnace locking out after several tries, cold air from the registers, or a glowing igniter that never lights the gas. This kit includes the OEM igniter (part 1176919) and its mounting bracket (part 1184324) for a complete, correct-fit replacement.

Specifications

Compatibility

Direct OEM replacement for the ICP, Tempstar, Heil, and Comfortmaker WFAR100C060C1 furnace. Match the igniter's terminal/plug style and bracket to your existing unit before installing.

Installation Guide

1. Safety First – Disconnect power at the breaker and shut off the gas; verify zero voltage with a multimeter.
2. Access – Remove the burner compartment service panel.
3. Document – Photograph the igniter position and wiring before disconnecting.
4. Remove – Unplug the lead and unscrew the old igniter and bracket. Handle the new element by the ceramic base only — never touch the silicon-carbide tip.
5. Install – Mount the new igniter with the included bracket and reconnect the lead per your photo.
6. Test – Restore gas and power, then watch a full ignition cycle to confirm the burners light.

Signs You Need a Replacement

• Furnace won't ignite or produce heat
• Igniter glows but gas never lights
• Furnace locks out after repeated ignition attempts
• Visible cracks or breaks in the igniter element

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.