What igniter fits my ICP furnace?

The correct replacement for ICP model WFAR100C060A1 — With Bracket | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFAR100C060A1 — With Bracket | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WFAR100C060A1 — With Bracket | Ships Today

Name: ICP Hot Surface Igniter for WFAR100C060A1 — With Bracket | Ships Today
Brand: ICP
SKU: 1184324
Price: 45.44 USD
Availability: InStock

SKU: 1184324 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM hot surface igniter assembly for the ICP / Tempstar / Heil WFAR100C060A1 gas furnace, including the igniter element (part number 1176919) and its mounting bracket (part number 1184324). The hot surface igniter glows red-hot on each call for heat and ignites the gas as it leaves the burners. It is one of the most common furnace wear items because the silicon-carbide or silicon-nitride element becomes brittle and cracks over thousands of heating cycles. Typical failure symptoms include no ignition, an igniter that never glows, repeated lockouts after several ignition attempts, or a visibly cracked/blistered element.

Specifications

Spec	Value
OEM Igniter Part Number	1176919
OEM Bracket Part Number	1184324
Type	Hot surface igniter
Brand	ICP (Tempstar / Heil / Comfortmaker)
Includes	Igniter element + mounting bracket
Fitment	OEM direct replacement

Compatibility

Designed as a direct OEM replacement for the ICP WFAR100C060A1 furnace and used across many ICP-family furnaces sold under the Tempstar, Heil, Comfortmaker, Arcoaire, KeepRite and Day & Night brands. Confirm your current igniter and bracket geometry match before ordering.

Installation Guide

Safety First — Shut off the gas, disconnect power at the furnace switch and breaker, and verify zero voltage with a multimeter.
Access — Remove the furnace burner-compartment service panel.
Document — Photograph the igniter position, bracket orientation, and the two-pin wire connector before disconnecting.
Remove — Unplug the igniter connector and remove the mounting screw(s); handle the old element by the ceramic base only and discard.
Install — Mount the new igniter and bracket without touching the element surface, then reconnect the wire harness.
Test — Restore gas and power, start a heat cycle, and confirm the igniter glows bright and the burners light cleanly.

Signs You Need a Replacement

Furnace blower runs but the burners never light
Igniter does not glow during the ignition sequence
Furnace locks out after three or more ignition attempts
Visible cracks, blisters, or breaks in the igniter element

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WFAR...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP WFAR100C060A1 — With Bracket | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFAR100C060A1 — With Bracket | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFAR100C060A1 — With Bracket | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu