ICP Hot Surface Igniter for WFAR080B048B1 — 120V with Mounting Bracket | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM hot surface igniter assembly is the ignition source for your ICP/Heil/Tempstar WFAR080B048B1 gas furnace. When the thermostat calls for heat, the control board energizes this 120V igniter; it glows to roughly 2,000°F and ignites the gas at the burners. Kit includes igniter part number 1176919 and igniter bracket 1184324 for a complete, correct fit. A failed igniter is one of the most common causes of no-heat calls — symptoms include the furnace running its blower but never lighting, a cracked or visibly broken igniter element, or repeated lockouts after several ignition attempts.
Specifications
| Spec | Value |
|---|---|
| Part Number | 1176919 (Igniter), 1184324 (Bracket) |
| Type | Hot Surface Igniter |
| Brand | ICP / Heil / Tempstar |
| Voltage | 120V |
| Fitment | OEM Direct Replacement |
| Includes | Igniter + Mounting Bracket |
Compatibility
Designed for the ICP/Heil/Tempstar/Comfortmaker WFAR080B048B1 80,000 BTU gas furnace. This OEM igniter and bracket match the factory specification, so it seats and wires exactly like the original with no modification required.
Installation Guide
- Safety First — Disconnect power at the furnace switch and breaker; verify zero voltage with a multimeter before touching wiring.
- Access — Remove the lower service/burner panel to expose the burner assembly.
- Document — Photograph the igniter wiring and bracket position before disconnecting anything.
- Remove — Unplug the igniter connector, remove the bracket screw(s), and carefully lift out the old igniter — handle the new element by the ceramic base only, never the silicon nitride tip.
- Install — Mount the new igniter on the supplied bracket, position it at the burner per your photo, and reconnect the wiring harness.
- Test — Restore power, run a heat cycle, and confirm the igniter glows and lights the burners cleanly.
Signs You Need a Replacement
- Furnace blower runs but burners never ignite.
- Visible cracks or breaks in the igniter element.
- Furnace locks out after 3+ failed ignition attempts.
- No glow visible from the igniter during a heat call.
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days