What igniter fits my ICP furnace?

The correct replacement for ICP model WFAR080B048A1 — OEM 1176919 with Bracket | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFAR080B048A1 — OEM 1176919 with Bracket | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WFAR080B048A1 — OEM 1176919 with Bracket | Ships Today

Name: ICP Hot Surface Igniter for WFAR080B048A1 — OEM 1176919 with Bracket | Ships Today
Brand: ICP
SKU: 1184324
Price: 44.20 USD
Availability: InStock

SKU: 1184324 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the genuine OEM hot surface igniter (part number 1176919) with its mounting bracket (part number 1184324) for the ICP WFAR080B048A1 gas furnace. The hot surface igniter glows red-hot when energized to light the burners at the start of each heating cycle. The element is silicon nitride or silicon carbide and is brittle by nature — repeated heating and cooling, accumulated dust, or a hairline crack will eventually cause it to fail. A bad igniter is one of the most common no-heat causes: the furnace runs its inducer and calls for ignition, but the burners never light, and the furnace locks out after a few failed attempts. Replacing the igniter (and its bracket, which positions it correctly over the burner) restores reliable ignition.

Specifications

Spec	Value
Igniter Part Number	1176919
Bracket Part Number	1184324
Type	Hot Surface Igniter
Brand	ICP / Heil / Tempstar / Comfortmaker
Function	Burner ignition
Fit	OEM Replacement

Compatibility

Direct OEM replacement for the ICP WFAR080B048A1 furnace and other ICP-family units (Heil, Tempstar, Comfortmaker, Arcoaire, KeepRite) that use igniter 1176919 and bracket 1184324. Confirm the igniter part number and connector style on your existing unit before ordering.

Installation Guide

Safety First — Disconnect power at the switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the burner-compartment service panel.
Document — Photograph the igniter position, bracket, and wire routing before removal.
Remove — Unplug the igniter connector and remove the bracket screw; handle the old igniter by the ceramic base only.
Install — Mount the new igniter and bracket without touching the element, then reconnect the plug.
Test — Restore power, call for heat, and watch for a clean glow and burner light-off.

Signs You Need a Replacement

Furnace inducer runs but burners never ignite.
Igniter does not glow, or glows weakly.
Visible crack, blister, or break in the element.
Repeated ignition lockouts after the gas valve and flame sensor check out.

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WFAR...

$44.20

Frequently Asked Questions

Does this Igniter fit my ICP WFAR080B048A1 — OEM 1176919 with Bracket | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFAR080B048A1 — OEM 1176919 with Bracket | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFAR080B048A1 — OEM 1176919 with Bracket | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu