What igniter fits my ICP furnace?

The correct replacement for ICP model WFAR060A042A1 — With Bracket | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFAR060A042A1 — With Bracket | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for WFAR060A042A1 — With Bracket | Ships Today

Name: ICP Hot Surface Igniter for WFAR060A042A1 — With Bracket | Ships Today
Brand: ICP
SKU: 1184324
Price: 42.84 USD
Availability: InStock

SKU: 1184324 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part #1176919) and matching mounting bracket (part #1184324) ignite the burners on your ICP Tempstar Heil WFAR060A042A1 gas furnace. On a heat call, the control board energizes the igniter, which glows white-hot to light the gas at the burners. The igniter is the single most common furnace failure point because the brittle silicon-carbide element degrades with every heating cycle and eventually cracks. A failed igniter is the usual reason a furnace blows cold air, locks out on ignition failure, or short-cycles — the inducer and blower may run, but the burners never light. The included bracket ensures the element is positioned at the correct gap and angle to the burner for reliable ignition.

Specifications

Spec	Value
Igniter Part Number	1176919
Bracket Part Number	1184324
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil)
Voltage	120V
Fitment	OEM Direct Replacement

Compatibility

Factory replacement for the ICP Tempstar Heil WFAR060A042A1 gas furnace and compatible ICP-family furnaces using the same 120V hot surface igniter and bracket assembly. Handle the silicon-carbide element only by its ceramic base — skin oils shorten its life.

Installation Guide

Safety First — Shut off gas and disconnect power, then verify zero voltage with a multimeter.
Access — Remove the furnace burner-compartment service panel.
Document — Photograph the igniter position, bracket alignment, and wire routing before removing.
Remove — Unplug the igniter connector, unscrew the old igniter and bracket, and discard them.
Install — Mount the new bracket and igniter, set the correct gap to the burner, and reconnect the plug — never touch the element with bare hands.
Test — Restore gas and power, call for heat, and confirm the igniter glows and the burners light.

Signs You Need a Replacement

Furnace blows cold air and never lights the burners
System locks out and displays an ignition-failure code
Igniter shows a visible crack or no longer glows
Repeated short-cycling on the heat call

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for WFAR...

$42.84

Frequently Asked Questions

Does this Igniter fit my ICP WFAR060A042A1 — With Bracket | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP WFAR060A042A1 — With Bracket | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP WFAR060A042A1 — With Bracket | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu