What igniter fits my ICP furnace?

The correct replacement for ICP model VNK075F14B2 — Silicon Nitride | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number VNK075F14B2 — Silicon Nitride | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for VNK075F14B2 — Silicon Nitride | Ships Today

Name: ICP Hot Surface Igniter for VNK075F14B2 — Silicon Nitride | Ships Today
Brand: ICP
SKU: 1009524
Price: 50.64 USD
Availability: InStock

SKU: 1009524 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter/sensor (part #1009524, HSP kit) is the ignition source for ICP, Tempstar, and Heil gas furnaces. On a call for heat the control board energizes the igniter, which glows white-hot to ignite the gas at the burners; the same kit handles flame-proving so the board knows the burners lit. Silicon-nitride-style hot surface igniters are more durable than legacy silicon carbide elements but still wear out with thermal cycling. A failed igniter is the single most common no-heat cause: the inducer runs, the gas valve waits, but the burners never light and the furnace locks out.

Specifications

Spec	Value
Part Number	1009524
Type	Hot Surface Igniter / Sensor (HSP Kit)
Brand	ICP / Tempstar / Heil
Element	Silicon Nitride Hot Surface
Function	Ignition + Flame Sensing
Fit	OEM Direct Replacement

Compatibility

Direct-fit replacement for ICP Tempstar Heil model VNK075F14B2 and other ICP-family gas furnaces specifying the 1009524 hot surface igniter kit. Confirm the existing part number and connector style before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter position and wiring connector before disconnecting.
Remove — Unplug the igniter harness, remove the mounting screw(s), and lift out the old igniter — never touch the element with bare fingers.
Install — Mount the new igniter handling it only by the ceramic base, then reconnect the harness.
Test — Restore power and watch a full ignition cycle to confirm the igniter glows and the burners light and stay lit.

Signs You Need a Replacement

Furnace inducer runs but burners never ignite
No glow visible from the igniter during a heat call
Visible cracks or breaks in the igniter element
Furnace locks out after several failed ignition attempts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for VNK0...

$50.64

Frequently Asked Questions

Does this Igniter fit my ICP VNK075F14B2 — Silicon Nitride | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP VNK075F14B2 — Silicon Nitride | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP VNK075F14B2 — Silicon Nitride | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu