What igniter fits my ICP furnace?

The correct replacement for ICP model VNE075F14G1 — Igniter/Sensor Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number VNE075F14G1 — Igniter/Sensor Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for VNE075F14G1 — Igniter/Sensor Kit | Ships Today

Name: ICP Hot Surface Igniter for VNE075F14G1 — Igniter/Sensor Kit | Ships Today
Brand: ICP
SKU: 1009524
Price: 51.94 USD
Availability: InStock

SKU: 1009524 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM hot surface igniter/sensor kit (part number 1009524) is the direct replacement for ICP, Tempstar, and Heil model VNE075F14G1 gas furnaces. The hot surface igniter glows red-hot on each call for heat to ignite the burner gas, and the kit includes the integrated flame-sensing function that confirms a flame so the gas valve stays open. Igniters are the most common furnace failure point — the brittle element cracks from repeated thermal cycling, contamination, or vibration. When it fails, the draft inducer and gas valve may cycle but the burners never light, leaving the home with no heat. A furnace you can hear trying to start but never igniting almost always points to a failed igniter.

Specifications

Spec	Value
Part Number	1009524
Type	Hot Surface Igniter / Sensor Kit
Brand	ICP / Tempstar / Heil
Function	Ignition + Flame Sensing
Fit	OEM Direct Replacement

Compatibility

Direct-fit OEM replacement for ICP, Tempstar, Heil, Comfortmaker, and Arcoaire model VNE075F14G1 and related gas furnaces that use the 1009524 igniter/sensor kit. Confirm your existing part number before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter mounting position and wiring harness routing.
Remove — Unplug the igniter connector and remove the mounting screw, handling the old element by its ceramic base only.
Install — Mount the new igniter without touching the element surface, then reconnect the harness per your photo.
Test — Restore power and watch a full ignition cycle to confirm the element glows and the burners light.

Signs You Need a Replacement

Furnace cycles but burners never light — no heat
Igniter shows visible cracks or does not glow
Furnace locks out after several failed ignition attempts
Intermittent ignition that gets worse over time

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for VNE0...

$51.94

Frequently Asked Questions

Does this Igniter fit my ICP VNE075F14G1 — Igniter/Sensor Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP VNE075F14G1 — Igniter/Sensor Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP VNE075F14G1 — Igniter/Sensor Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu