What igniter fits my ICP furnace?

The correct replacement for ICP model RGX060KMCA0AAA — Silicon Nitride OEM 1171306 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGX060KMCA0AAA — Silicon Nitride OEM 1171306 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGX060KMCA0AAA — Silicon Nitride OEM 1171306 | Ships Today

Name: ICP Hot Surface Igniter for RGX060KMCA0AAA — Silicon Nitride OEM 1171306 | Ships Today
Brand: ICP
SKU: 1171306
Price: 45.44 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part number 1171306) is the factory ignition component for the ICP / Heil / Tempstar RGX060KMCA0AAA gas furnace. On each call for heat the control board sends 120V to the igniter, which glows to roughly 2,000°F and ignites the gas at the burners. Hot surface igniters are the single most common gas-furnace failure — the silicon nitride element is brittle and cracks from thermal cycling, vibration, or contamination from skin oils. When it fails, the draft inducer runs but the burners never light, leaving the home without heat and usually triggering an ignition-fault code on the board.

Specifications

Spec	Value
Part Number	1171306
Type	Hot Surface Igniter (Silicon Nitride)
Brand	ICP / Heil / Tempstar
Voltage	120V
Application	Gas Furnace Ignition
Fit	OEM Direct Replacement

Compatibility

Engineered as the exact-fit replacement for the ICP / Heil / Tempstar / Comfortmaker RGX060KMCA0AAA gas furnace. The same igniter is used across many RGX-series and related Heil-built furnace platforms. Confirm the part number and bracket orientation against your failed igniter before installing.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, and shut off the gas. Verify zero voltage with a multimeter.
Access — Remove the furnace burner-compartment service panel.
Document — Photograph the igniter's bracket position and connector routing before disconnecting.
Remove — Unplug the igniter connector, remove the mounting screw, and withdraw the igniter — never touch the ceramic element with bare fingers.
Install — Mount the new igniter in the same orientation, reseat the screw, and reconnect the plug per your photo.
Test — Restore gas and power, run a heat call, and confirm the igniter glows and the burners light within seconds.

Signs You Need a Replacement

Inducer runs but burners never ignite — no heat.
Visible crack, blister, or break in the ceramic element.
Igniter glows weakly or not at all on a heat call.
Control board flashes an ignition-failure or lockout fault code.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGX0...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP RGX060KMCA0AAA — Silicon Nitride OEM 1171306 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGX060KMCA0AAA — Silicon Nitride OEM 1171306 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGX060KMCA0AAA — Silicon Nitride OEM 1171306 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu