ICP Hot Surface Igniter for RGX060KFXA0AAA Gas Furnace — OEM 1171306 | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This is the OEM hot surface igniter (Part No. 1171306) for the ICP / Heil / Tempstar RGX060KFXA0AAA gas furnace. The hot surface igniter (HSI) glows red-hot when the control board energizes it, igniting the gas at the burners during each heat cycle. Igniters are a normal wear item — the brittle silicon-carbide or nitride element degrades with every ignition cycle and eventually cracks or fails open. When the igniter fails you get a furnace that runs the inducer and clicks but never lights, a no-heat call, or a hard ignition lockout after several failed tries. A genuine OEM HSI restores fast, reliable burner ignition.
Specifications
| Spec | Value |
|---|---|
| Part Number | 1171306 |
| Description | Ignitor (Hot Surface Igniter) |
| Type | Hot Surface Igniter (HSI) |
| Brand | ICP (Heil / Tempstar / Comfortmaker) |
| Fits Model | RGX060KFXA0AAA |
| Application | Gas Furnace Burner Ignition |
| Fitment | OEM Direct Replacement |
Compatibility
Direct OEM replacement igniter for the ICP / Heil / Tempstar RGX060KFXA0AAA gas furnace. Matches the factory mounting bracket and connector so it drops into the original location and seats over the burner exactly like the original. Handle only by the ceramic base — never touch the fragile element.
Installation Guide
- Safety First — Shut off gas and disconnect power at the furnace switch and breaker. Verify zero voltage with a multimeter.
- Access — Remove the burner-compartment service panel.
- Document — Photograph the igniter position and its wire harness routing before removal.
- Remove — Unplug the igniter connector, remove the mounting screw(s), and carefully withdraw the old igniter without touching the element.
- Install — Mount the new 1171306 igniter handling it only by the ceramic base, align it over the burner per your photo, and reconnect the harness.
- Test — Restore gas and power, start a heat call, and confirm the igniter glows and the burners light promptly with no lockout.
Signs You Need a Replacement
- Furnace tries to start but burners never light (no heat)
- Igniter does not glow when energized
- Visible crack, break, or hot spot in the igniter element
- Repeated ignition lockouts after several failed attempts
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days