What igniter fits my ICP furnace?

The correct replacement for ICP model RGX060KFCA0AAA Furnace — OEM Ignitor | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGX060KFCA0AAA Furnace — OEM Ignitor | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGX060KFCA0AAA Furnace — OEM Ignitor | Ships Today

Name: ICP Hot Surface Igniter for RGX060KFCA0AAA Furnace — OEM Ignitor | Ships Today
Brand: ICP
SKU: 1171306
Price: 44.14 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM hot surface igniter (part 1171306) lights the burners on the ICP/Tempstar/Heil RGX060KFCA0AAA gas furnace. On a heat call the control board sends line voltage to the igniter, which glows white-hot and ignites the gas as the valve opens. The igniter element is fragile and degrades with every heating cycle — eventually it cracks or no longer reaches ignition temperature, leaving the furnace unable to light. A failed igniter is one of the most common causes of no-heat calls. Installing a fresh OEM ignitor restores fast, dependable burner light-off through the cold season.

Specifications

Spec	Value
Part Number	1171306
Type	Hot surface igniter (ignitor)
Brand	ICP / Tempstar / Heil (OEM)
Application	Gas furnace burner ignition
Fitment	Direct OEM replacement

Compatibility

Designed for the ICP family RGX060KFCA0AAA 60,000 BTU gas furnace and related RGX-series furnaces specifying the 1171306 igniter, including matching Tempstar, Heil, and Comfortmaker models.

Installation Guide

Safety First — Turn off gas and disconnect power, then verify zero voltage with a multimeter.
Access — Remove the burner compartment access panel.
Document — Photograph the igniter bracket position and wire routing.
Remove — Unplug the igniter connector and remove the mounting screw; handle the old element by the ceramic base only.
Install — Mount the new igniter without touching the element, then reconnect the plug.
Test — Restore gas and power and confirm the igniter glows and the burners light on a heat call.

Signs You Need a Replacement

Furnace blower runs but burners never ignite (no heat).
Igniter shows cracks or no longer glows.
Repeated lockouts after several ignition attempts.
Visible hot spots or a broken silicon carbide/nitride element.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGX0...

$44.14

Frequently Asked Questions

Does this Igniter fit my ICP RGX060KFCA0AAA Furnace — OEM Ignitor | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGX060KFCA0AAA Furnace — OEM Ignitor | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGX060KFCA0AAA Furnace — OEM Ignitor | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu