What igniter fits my ICP furnace?

The correct replacement for ICP model RGX060KEXA0AAA — Silicon Nitride | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGX060KEXA0AAA — Silicon Nitride | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGX060KEXA0AAA — Silicon Nitride | Ships Today

Name: ICP Hot Surface Igniter for RGX060KEXA0AAA — Silicon Nitride | Ships Today
Brand: ICP
SKU: 1171306
Price: 51.94 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the genuine OEM hot surface igniter (part #1171306) for the ICP/Heil/Tempstar RGX060KEXA0AAA gas furnace. The hot surface igniter is energized by the control board at the start of each heating cycle; it heats to a glowing temperature and ignites the gas as it leaves the burners. Igniters are a wear item — repeated thermal cycling makes the element brittle until it cracks. A failed igniter is one of the most common causes of no-heat calls: the inducer runs and the gas valve tries to open, but the burners never light. Replacing this igniter restores fast, reliable ignition.

Specifications

Spec	Value
Part Number	1171306
Type	Hot Surface Igniter
Brand	ICP (Heil / Tempstar)
Supply Voltage	120V
Fitment	OEM Replacement

Compatibility

Direct OEM replacement for the ICP/Heil/Tempstar RGX060KEXA0AAA furnace and other ICP-family models that share the same igniter mounting bracket and connector. Confirm the bracket and plug match your existing igniter before installing.

Installation Guide

Safety First — Shut off gas and disconnect power, then verify zero voltage with a multimeter.
Access — Remove the burner-compartment service panel.
Document — Photograph the igniter position and wire routing before removal.
Remove — Unplug the igniter harness and remove the mounting screw; handle only by the ceramic base — never touch the fragile element.
Install — Position the new igniter so the element aligns with the burner, secure the screw, and reconnect the harness.
Test — Restore gas and power, start a heat cycle, and confirm the igniter glows and burners light promptly.

Signs You Need a Replacement

No heat — burners never light despite inducer running
Visible crack or break in the igniter element
Igniter glows weakly or not at all
Furnace locks out after several failed ignition attempts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGX0...

$51.94

Frequently Asked Questions

Does this Igniter fit my ICP RGX060KEXA0AAA — Silicon Nitride | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGX060KEXA0AAA — Silicon Nitride | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGX060KEXA0AAA — Silicon Nitride | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu