What igniter fits my ICP furnace?

The correct replacement for ICP model RGX036KECA0AAA — OEM 1171306 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGX036KECA0AAA — OEM 1171306 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGX036KECA0AAA — OEM 1171306 | Ships Today

Name: ICP Hot Surface Igniter for RGX036KECA0AAA — OEM 1171306 | Ships Today
Brand: ICP
SKU: 1171306
Price: 44.20 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part number 1171306) is the ignition source for the ICP/Tempstar/Heil RGX036KECA0AAA gas furnace. On a call for heat the control board energizes the igniter, which glows red-hot to light the burners. Igniters are a high-wear consumable — they are brittle and degrade with every heating cycle. Common failure symptoms include the furnace blower running but no flame, repeated ignition lockouts, a cracked or visibly white/blistered igniter element, or no glow at all when heat is called. Replacing the igniter with the correct OEM part restores reliable, on-demand ignition.

Specifications

Spec	Value
Part Number	1171306
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Fits Model	RGX036KECA0AAA
Application	Gas Furnace Ignition
Fitment	OEM Direct Replacement

Compatibility

Engineered as the direct OEM replacement for the ICP/Tempstar/Heil RGX036KECA0AAA furnace. Many ICP-family models share this igniter — always confirm your existing part number (1171306) and connector style before installing.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker; shut off the gas. Verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter wiring and bracket position before disconnecting.
Remove — Unplug the igniter connector and remove the mounting screw(s). Handle the old element by its ceramic base only.
Install — Mount the new igniter without touching the element surface, then reconnect the plug per your photo.
Test — Restore gas and power and run a heat cycle; confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

Furnace ignites intermittently or locks out after several attempts.
Blower runs but burners never light.
Igniter element is cracked, chipped, or shows white blistering.
No visible glow when heat is called.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGX0...

$44.20

Frequently Asked Questions

Does this Igniter fit my ICP RGX036KECA0AAA — OEM 1171306 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGX036KECA0AAA — OEM 1171306 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGX036KECA0AAA — OEM 1171306 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu