What igniter fits my ICP furnace?

The correct replacement for ICP model RGS303SRAA0AAAA — Ignitor Electrode | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS303SRAA0AAAA — Ignitor Electrode | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS303SRAA0AAAA — Ignitor Electrode | Ships Today

Name: ICP Hot Surface Igniter for RGS303SRAA0AAAA — Ignitor Electrode | Ships Today
Brand: ICP
SKU: 1179966
Price: 44.20 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM ignitor electrode (part number 1179966) for the ICP Tempstar Heil RGS303SRAA0AAAA gas furnace. The igniter heats on a call for heat and lights the gas at the burners. Hot surface igniters are brittle and degrade with every heating cycle; a cracked or aged element is one of the most common reasons a furnace fails to fire. Typical symptoms include no ignition despite an audible gas valve and inducer running, a furnace that locks out on repeated ignition failures, or a visibly cracked or no-longer-glowing element. This igniter is a direct OEM replacement that restores reliable startup.

Specifications

Spec	Value
Part Number	1179966
Type	Hot Surface Ignitor / Electrode
Brand	ICP / Tempstar / Heil
Voltage	120V
Application	Gas Furnace Ignition
Fitment	OEM Replacement

Compatibility

Designed for the ICP family RGS303SRAA0AAAA furnace and shared across compatible Tempstar, Heil, Comfortmaker, Arcoaire, and KeepRite gas furnaces using this igniter. Confirm the part number and mounting bracket against your original before ordering.

Installation Guide

Safety First — Disconnect power at the switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the burner compartment door.
Document — Photograph the igniter position, bracket, and wiring before removal.
Remove — Unplug the igniter connector and remove the mounting screw; handle the old element by the bracket only, never the ceramic.
Install — Mount the new igniter without touching the element, then reconnect the harness per your photo.
Test — Restore power, start a heat cycle, and verify the igniter glows and the burners light.

Signs You Need a Replacement

Furnace will not light on a call for heat
Visible cracks or breaks in the igniter element
Element no longer glows during the ignition sequence
Repeated ignition lockouts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS3...

$44.20

Frequently Asked Questions

Does this Igniter fit my ICP RGS303SRAA0AAAA — Ignitor Electrode | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS303SRAA0AAAA — Ignitor Electrode | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS303SRAA0AAAA — Ignitor Electrode | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu