What igniter fits my ICP furnace?

The correct replacement for ICP model RGS243SDEA0AAAA — OEM Ignitor Electrode 1179966 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS243SDEA0AAAA — OEM Ignitor Electrode 1179966 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS243SDEA0AAAA — OEM Ignitor Electrode 1179966 | Ships Today

Name: ICP Hot Surface Igniter for RGS243SDEA0AAAA — OEM Ignitor Electrode 1179966 | Ships Today
Brand: ICP
SKU: 1179966
Price: 45.44 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

The OEM hot surface ignitor electrode, ICP part number 1179966, lights the burners on your ICP/Heil/Tempstar RGS243SDEA0AAAA gas furnace. On a call for heat the control board energizes the igniter, which glows red-hot to ignite the gas. These igniters are brittle and degrade over thousands of cycles; a cracked or open element is one of the most common no-heat causes. Symptoms include the igniter not glowing, the furnace locking out after a few ignition attempts, or burners that fail to light.

Specifications

Spec	Value
Part Number	1179966 (IGNITOR ELECTRODE)
Type	Hot Surface Igniter
Brand	ICP / Heil / Tempstar
Fits Model	RGS243SDEA0AAAA
Fit	OEM Direct Replacement

Compatibility

Direct OEM fit for the ICP Tempstar Heil RGS243SDEA0AAAA gas furnace and related RGS243 series units originally equipped with igniter 1179966. Handle the new igniter only by its ceramic base — never touch the element.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter bracket position and wiring before disconnecting.
Remove — Unplug the igniter connector, remove the mounting screw, and carefully withdraw the old igniter without bumping the element.
Install — Mount the new 1179966 igniter holding only the ceramic base, then reconnect the harness per your photo.
Test — Restore power and run a heat cycle; confirm the igniter glows and the burners light reliably.

Signs You Need a Replacement

Igniter does not glow on a call for heat
Furnace locks out after several failed ignition attempts
Visible cracks or breaks in the igniter element
No heat with the inducer and gas valve otherwise working

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS2...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP RGS243SDEA0AAAA — OEM Ignitor Electrode 1179966 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS243SDEA0AAAA — OEM Ignitor Electrode 1179966 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS243SDEA0AAAA — OEM Ignitor Electrode 1179966 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu