What igniter fits my ICP furnace?

The correct replacement for ICP model RGS240HTEA0AAAA — Direct-Fit Electrode | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS240HTEA0AAAA — Direct-Fit Electrode | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS240HTEA0AAAA — Direct-Fit Electrode | Ships Today

Name: ICP Hot Surface Igniter for RGS240HTEA0AAAA — Direct-Fit Electrode | Ships Today
Brand: ICP
SKU: 1179966
Price: 45.44 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the genuine OEM hot surface igniter electrode (part 1179966) for the ICP / Heil / Tempstar RGS240HTEA0AAAA gas furnace. On a call for heat, the control board energizes the igniter, which glows white-hot to ignite the gas at the burners during the ignition sequence. Hot surface igniters are brittle silicon-carbide or silicon-nitride elements that degrade with every heating cycle and eventually crack, develop hairline fractures, or simply stop glowing. A failed igniter is the single most common cause of a no-heat furnace: the inducer runs, the gas valve waits, but ignition never occurs and the board locks out. Because the element is fragile, it should never be touched on the glow surface during installation — skin oils shorten its life dramatically.

Specifications

Spec	Value
OEM Part Number	1179966
Type	Hot Surface Igniter Electrode
Brand	ICP / Heil / Tempstar
Function	Burner Ignition
Fitment	OEM Direct Replacement

Compatibility

Direct-fit replacement igniter for the ICP RGS240HTEA0AAAA gas furnace and related Heil, Tempstar, and Comfortmaker platform models. Confirm the mounting bracket and connector match your existing igniter before installing.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter position and connector routing before disconnecting.
Remove — Unplug the igniter connector and remove the mounting screw, handling the element only by its ceramic base.
Install — Mount the new igniter without touching the glow element, then reconnect the plug per your photo.
Test — Restore power and watch a full ignition cycle to confirm the igniter glows and the burners light.

Signs You Need a Replacement

Furnace runs the inducer but never ignites
Igniter does not glow during the heat sequence
Visible cracks, breaks, or white powder on the element
Control board locks out on ignition failure

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS2...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP RGS240HTEA0AAAA — Direct-Fit Electrode | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS240HTEA0AAAA — Direct-Fit Electrode | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS240HTEA0AAAA — Direct-Fit Electrode | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu