What igniter fits my ICP furnace?

The correct replacement for ICP model RGS240HFFA0AAAA — Silicon Nitride | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS240HFFA0AAAA — Silicon Nitride | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS240HFFA0AAAA — Silicon Nitride | Ships Today

Name: ICP Hot Surface Igniter for RGS240HFFA0AAAA — Silicon Nitride | Ships Today
Brand: ICP
SKU: 1179966
Price: 38.94 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter electrode (OEM 1179966) lights the gas burner on your ICP / Tempstar / Heil RGS240HFFA0AAAA rooftop gas-electric unit. On a call for heat, the control board sends 120V to the igniter; it glows white-hot and ignites the gas as the valve opens. Igniters are brittle and wear out — a cracked or open element is one of the most common causes of no-heat calls, leaving you with an inducer that runs but no flame and a board locked out on ignition failure.

Specifications

Spec	Value
OEM Part Number	1179966 (Ignitor Electrode)
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil / Comfortmaker)
Voltage	120V
Application	Gas burner ignition

Compatibility

Fits the ICP / Tempstar / Heil RGS240HFFA0AAAA rooftop gas-electric package unit and related RGS240-series furnaces using this electrode-style hot surface igniter. Confirm the bracket and connector match your existing igniter before ordering.

Installation Guide

Safety First — Disconnect power and shut off the gas; verify zero voltage with a multimeter.
Access — Remove the burner/control access panel.
Document — Photograph the igniter position and wire routing before disconnecting.
Remove — Unplug the igniter connector and remove the mounting screw; handle the old element by the ceramic base only.
Install — Mount the new igniter without touching the element, then reconnect per your photo.
Test — Restore gas and power and confirm the igniter glows and the burner lights.

Signs You Need a Replacement

No heat — inducer runs but the burner never lights
Visible crack or break in the igniter element
Igniter glows weakly or not at all
Control board locks out on ignition failure

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS2...

$38.94

Frequently Asked Questions

Does this Igniter fit my ICP RGS240HFFA0AAAA — Silicon Nitride | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS240HFFA0AAAA — Silicon Nitride | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS240HFFA0AAAA — Silicon Nitride | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu