What igniter fits my ICP furnace?

The correct replacement for ICP model RGS240HEEA0AAAA — 120V | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS240HEEA0AAAA — 120V | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS240HEEA0AAAA — 120V | Ships Today

Name: ICP Hot Surface Igniter for RGS240HEEA0AAAA — 120V | Ships Today
Brand: ICP
SKU: 1179966
Price: 44.20 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter electrode (OEM 1179966) lights the burners on your ICP / Heil / Tempstar RGS240HEEA0AAAA gas furnace. On each call for heat, the control board sends 120V to the igniter, which glows white-hot to ignite the gas as it leaves the burners. The igniter is one of the most frequently replaced furnace parts because the element is brittle and degrades with every heating cycle — thermal stress eventually cracks it. A furnace that clicks and tries to start but never produces heat, then locks out after several attempts, is the classic symptom of a cracked or burned-out igniter. Because the element is fragile, never touch its surface with bare fingers — skin oils create hot spots that shorten its life.

Specifications

Spec	Value
OEM Part Number	1179966
Type	Hot Surface Igniter Electrode
Brand	ICP / Heil / Tempstar
Voltage	120V
Element	Silicon Nitride
Application	Gas furnace burner ignition

Compatibility

Direct-fit replacement for the ICP / Heil / Tempstar / Comfortmaker RGS240HEEA0AAAA gas furnace and related platform models using the same burner ignition assembly. Confirm the connector style and mounting bracket match your original before installing.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter position and wiring before disconnecting.
Remove — Unplug the igniter harness and remove the mounting screw(s); handle only by the ceramic base.
Install — Mount the new igniter without touching the element, reconnect the harness per your photo.
Test — Restore power, start a heat cycle, and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

Furnace ignites no heat — clicks, tries, then locks out
Igniter does not glow when commanded
Visible cracks, blisters, or breaks in the element
Intermittent ignition or repeated lockout codes

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS2...

$44.20

Frequently Asked Questions

Does this Igniter fit my ICP RGS240HEEA0AAAA — 120V | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS240HEEA0AAAA — 120V | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS240HEEA0AAAA — 120V | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu