What igniter fits my ICP furnace?

The correct replacement for ICP model RGS240HDAA0AGAA — Ignitor Electrode | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS240HDAA0AGAA — Ignitor Electrode | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS240HDAA0AGAA — Ignitor Electrode | Ships Today

Name: ICP Hot Surface Igniter for RGS240HDAA0AGAA — Ignitor Electrode | Ships Today
Brand: ICP
SKU: 1179966
Price: 41.60 USD
Availability: InStock

SKU: 1179966 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM ignitor electrode (part 1179966) is the ignition source for your ICP / Tempstar / Heil RGS240HDAA0AGAA gas furnace. On each call for heat the igniter heats to incandescence and lights the burners, then the flame-sensing electrode confirms a stable flame. Igniters are a common wear item — repeated thermal cycling causes the element to crack, develop hot spots, or simply fail open. The result is no ignition, repeated lockouts, or short cycling. Installing the correct OEM electrode restores fast, dependable light-off and proper flame proving.

Specifications

Spec	Value
OEM Part Number	1179966 (Ignitor Electrode)
Type	Hot Surface Igniter Electrode
Brand	ICP (Tempstar / Heil / Comfortmaker)
Application	Gas Furnace Ignition
Fitment	OEM Direct Replacement

Compatibility

Direct OEM fit for the ICP / Tempstar / Heil RGS240HDAA0AGAA furnace and matching RGS240-series burner assemblies. Confirm the bracket orientation and part number against your existing igniter before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker; verify zero voltage with a multimeter and shut off the gas supply.
Access — Remove the burner/service panel.
Document — Photograph the igniter position, bracket, and wire routing before disconnecting.
Remove — Unplug the igniter connector and remove the mounting screw; handle the old element by the ceramic base only.
Install — Mount the new electrode without touching the element surface, then reconnect per your photo.
Test — Restore power and gas, then watch a full ignition sequence for clean light-off and steady flame.

Signs You Need a Replacement

Furnace fails to light on a call for heat
Igniter does not glow or glows unevenly
Repeated ignition lockouts or short cycling
Visible cracks, blistering, or hot spots on the element

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS2...

$41.60

Frequently Asked Questions

Does this Igniter fit my ICP RGS240HDAA0AGAA — Ignitor Electrode | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS240HDAA0AGAA — Ignitor Electrode | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS240HDAA0AGAA — Ignitor Electrode | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu