What igniter fits my ICP furnace?

The correct replacement for ICP model RGS180LFAA0AAAA — OEM Spark Ignitor 1184216 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS180LFAA0AAAA — OEM Spark Ignitor 1184216 | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS180LFAA0AAAA — OEM Spark Ignitor 1184216 | Ships Today

Name: ICP Hot Surface Igniter for RGS180LFAA0AAAA — OEM Spark Ignitor 1184216 | Ships Today
Brand: ICP
SKU: 1184216
Price: 45.44 USD
Availability: InStock

SKU: 1184216 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the genuine OEM igniter / spark ignitor (part number 1184216) for the ICP / Tempstar / Heil RGS180LFAA0AAAA gas furnace. The igniter is the heart of the ignition sequence — it lights the burners each time the furnace calls for heat. Igniters are a common wear item: thermal cycling eventually cracks the element or erodes the spark gap, leaving the furnace unable to light. Symptoms include no heat, repeated lockouts, or a furnace that cycles the inducer and gas valve but never fires. Replacing a failed igniter restores fast, dependable ignition.

Specifications

Spec	Value
Part Number	1184216
Type	Igniter / Spark Ignitor
Brand	ICP (Tempstar / Heil)
Application	Gas Furnace Burner Ignition
Fit	OEM Replacement

Compatibility

Designed for the ICP RGS180LFAA0AAAA and the Tempstar, Heil, and Comfortmaker furnaces that specify OEM igniter 1184216. Handle the element only by its ceramic base — skin oils shorten igniter life.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter. Shut off the gas supply.
Access — Remove the furnace burner-compartment service panel.
Document — Photograph the igniter mounting position and wire routing.
Remove — Unplug the igniter connector and remove the mounting screw, lifting the old igniter clear of the burner.
Install — Seat the new igniter at the correct gap, secure the screw, and reconnect the plug — touch only the ceramic base.
Test — Restore gas and power, call for heat, and confirm the igniter glows/sparks and lights the burners.

Signs You Need a Replacement

Furnace runs the ignition sequence but never lights
Repeated ignition lockouts after several tries
Visibly cracked, chipped, or eroded igniter element
No heat on a call despite inducer and gas valve cycling

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS1...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP RGS180LFAA0AAAA — OEM Spark Ignitor 1184216 | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS180LFAA0AAAA — OEM Spark Ignitor 1184216 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS180LFAA0AAAA — OEM Spark Ignitor 1184216 | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu