What igniter fits my ICP furnace?

The correct replacement for ICP model RGS150SFBA0AAAA — Silicon Carbide Element | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS150SFBA0AAAA — Silicon Carbide Element | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS150SFBA0AAAA — Silicon Carbide Element | Ships Today

Name: ICP Hot Surface Igniter for RGS150SFBA0AAAA — Silicon Carbide Element | Ships Today
Brand: ICP
SKU: 1171306
Price: 45.44 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the genuine OEM hot surface igniter assembly for the ICP / Heil / Tempstar RGS150SFBA0AAAA gas furnace, OEM part number 1171306, supplied with the matching igniter wiring kit (OEM 1188370). The igniter glows red-hot on a heat call to ignite the gas at the burners. It uses a durable silicon carbide element energized at 120V through the integrated furnace control board. When the igniter cracks, develops a hairline fracture, or burns through, the furnace runs its sequence — inducer, gas valve open — but never lights, leaving the home without heat.

Specifications

Spec	Value
OEM Part Number	1171306 (Igniter), 1188370 (Wiring Kit)
Type	Hot Surface Igniter
Element	Silicon Carbide
Brand	ICP / Heil / Tempstar
Voltage	120V
Fitment	OEM Direct Replacement

Compatibility

Directly fits the ICP / Heil / Tempstar / Comfortmaker RGS150SFBA0AAAA gas furnace and shares the igniter platform used across many ICP-family RGS-series and equivalent Heil/Tempstar models. Always confirm your model and OEM part number before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, and verify zero voltage with a multimeter. Shut off the gas supply.
Access — Remove the furnace burner/blower service panel.
Document — Photograph the igniter leads and harness routing before disconnecting.
Remove — Unplug the igniter connector, remove the mounting screw(s), and withdraw the old igniter. The ceramic base is brittle — never touch the element.
Install — Mount the new igniter in the same orientation, install the supplied wiring kit, and reconnect per your photo. Handle only by the ceramic base.
Test — Restore gas and power, run a heat cycle, and confirm the igniter glows and the burners light promptly.

Signs You Need a Replacement

Furnace cycles through ignition but never lights (no flame)
Igniter no longer glows orange/white during the heat call
Visible cracks, blisters, or burned spots on the element
Repeated ignition lockouts after a few seconds of attempted light

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS1...

$45.44

Frequently Asked Questions

Does this Igniter fit my ICP RGS150SFBA0AAAA — Silicon Carbide Element | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS150SFBA0AAAA — Silicon Carbide Element | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS150SFBA0AAAA — Silicon Carbide Element | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu