What igniter fits my ICP furnace?

The correct replacement for ICP model RGS150LRAA0AGAA — 120V Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS150LRAA0AGAA — 120V Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS150LRAA0AGAA — 120V Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS150LRAA0AGAA — 120V Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 44.20 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter lights the burners on your ICP RGS150LRAA0AGAA package gas unit. On a heat call, the control board sends 120V to the igniter, which glows red-hot to ignite the gas as the valve opens. This kit pairs the igniter (OEM 1171306) with the matching wiring harness (OEM 1188370) for a clean, complete replacement. Hot surface igniters are brittle and degrade over time — a cracked or worn element is one of the most common reasons a furnace stops producing heat.

Specifications

Spec	Value
Part Number(s)	1171306 (Igniter), 1188370 (Igniter Wiring Kit)
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil / Comfortmaker)
Voltage	120V
Includes	Igniter + Wiring Harness
Fitment	OEM Direct Replacement

Compatibility

Direct fit for the ICP RGS150LRAA0AGAA package gas/electric unit and ICP-family furnaces and package units sold under Tempstar, Heil, and Comfortmaker that use this 120V igniter and harness. Verify the mounting tab and connector style against your existing igniter.

Installation Guide

Safety First — Disconnect power to the unit and verify zero voltage with a multimeter before reaching into the burner compartment.
Access — Remove the service panel to expose the burner assembly and igniter.
Document — Photograph the igniter position and the harness routing to the control board.
Remove — Unplug the harness and unscrew the igniter bracket. Handle only the ceramic base — never touch the element.
Install — Mount the new igniter, route and connect the new wiring harness, keeping the element clear of the burner.
Test — Restore power, start a heat cycle, and confirm the element glows and lights the burners promptly.

Signs You Need a Replacement

No glow from the igniter on a heat call
Furnace locks out after several failed ignition attempts
Visible cracks or chips in the igniter element
Delayed ignition or a rumble at light-off

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day hassle-free returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS1...

$44.20

Frequently Asked Questions

Does this Igniter fit my ICP RGS150LRAA0AGAA — 120V Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS150LRAA0AGAA — 120V Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS150LRAA0AGAA — 120V Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu