What igniter fits my ICP furnace?

The correct replacement for ICP model RGS150LEAA0AAAA — 120V Silicon Nitride Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS150LEAA0AAAA — 120V Silicon Nitride Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS150LEAA0AAAA — 120V Silicon Nitride Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS150LEAA0AAAA — 120V Silicon Nitride Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 51.94 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter kit (part 1171306) is the ignition source for the ICP/Heil/Tempstar RGS150LEAA0AAAA gas furnace. When a heat call is received, the control board sends 120V to the igniter element, which heats to roughly 2000°F to ignite the gas at the burners. This kit ships with the matching igniter wiring harness (part 1188370) so the plug and pigtail seat correctly without splicing. A failed igniter is one of the most common no-heat causes: the element cracks from thermal cycling, glows weakly, or fails to glow at all, leaving the furnace locked out after several ignition attempts.

Specifications

Spec	Value
OEM Part Number	1171306 (igniter), 1188370 (wiring kit)
Type	Hot Surface Igniter
Element	Silicon Nitride
Brand	ICP / Heil / Tempstar
Voltage	120V
Application	Gas Furnace Ignition

Compatibility

Designed as a direct-fit replacement for the ICP/Heil/Tempstar/Comfortmaker RGS150LEAA0AAAA furnace. The supplied wiring harness matches the OEM connector so no modification is required. Confirm your model number on the furnace rating plate before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, and shut off the gas. Verify zero voltage at the igniter with a multimeter.
Access — Remove the burner compartment service panel.
Document — Photograph the igniter mounting and harness routing before disconnecting.
Remove — Unplug the igniter harness, remove the mounting screw, and lift the old igniter out without touching the new element with bare fingers.
Install — Mount the new igniter, route and plug in the new wiring harness per your photo, and confirm the element sits in the flame path.
Test — Restore gas and power, start a heat cycle, and verify the igniter glows and the burners light cleanly.

Signs You Need a Replacement

Furnace locks out after 3 ignition attempts with no flame
Igniter glows dim, uneven, or not at all
Visible crack or white spots on the element
Open circuit when tested for resistance

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS1...

$51.94

Frequently Asked Questions

Does this Igniter fit my ICP RGS150LEAA0AAAA — 120V Silicon Nitride Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS150LEAA0AAAA — 120V Silicon Nitride Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS150LEAA0AAAA — 120V Silicon Nitride Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu