ICP Hot Surface Igniter for RGS150HEBA0AGAA — OEM 1171306 + Wiring Kit | Ships Today

Overview

This genuine OEM hot surface igniter, part number 1171306, lights the burners on the ICP / Tempstar / Heil RGS150HEBA0AGAA gas furnace. On a heat call the control board sends voltage to the igniter, which glows to ignition temperature and lights the gas at the burners. The matching igniter wiring kit (P/N 1188370) is included for a clean replacement with fresh leads and connector. Hot surface igniters are brittle and degrade with every heating cycle — they crack, develop hairline fractures, or simply stop glowing, which is the most common cause of a furnace that ignites intermittently or not at all.

Specifications

Compatibility

Designed for the RGS150HEBA0AGAA and related ICP-family gas furnaces using this hot surface igniter and connector. Confirm against your unit's parts breakdown before ordering.

Installation Guide

1. Safety First — Shut off gas and power, and verify zero voltage with a multimeter.
2. Access — Remove the burner-compartment service panel.
3. Document — Photograph the igniter bracket position and wire routing.
4. Remove — Unplug the igniter connector and remove the mounting screw; handle the old igniter by the ceramic base only.
5. Install — Mount the new igniter without touching the silicon-carbide element, route the new wiring kit, and seat the connector.
6. Test — Restore gas and power, call for heat, and confirm the igniter glows and lights the burners on the first cycle.

Signs You Need a Replacement

• Furnace clicks and tries to ignite but never lights
• Igniter does not glow on a heat call
• Visible crack, chip, or white spot on the element
• Intermittent ignition or repeated lockouts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.