What igniter fits my ICP furnace?

The correct replacement for ICP model RGS150HEAA0AKAA — 120V with Wiring Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS150HEAA0AKAA — 120V with Wiring Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS150HEAA0AKAA — 120V with Wiring Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS150HEAA0AKAA — 120V with Wiring Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 44.20 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter lights the burners on your ICP RGS150HEAA0AKAA gas furnace. On a heat call the control board sends 120V to the igniter, which glows orange-hot within seconds and ignites the gas as it crosses the burners. The kit pairs the igniter (OEM 1171306) with the matching wiring harness kit (OEM 1188370) so you get a complete, plug-in replacement. Hot surface igniters are brittle silicon-carbide or silicon-nitride elements that degrade with every cycle and crack easily — the single most common no-heat failure on modern furnaces. Never touch the element with bare fingers; skin oils create hot spots that shorten its life.

Specifications

Spec	Value
OEM Part Numbers	1171306 (igniter), 1188370 (wiring kit)
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil / Comfortmaker)
Voltage	120V
Includes	Igniter + wiring harness kit

Compatibility

A direct OEM fit for the ICP RGS150HEAA0AKAA and shared ICP-family furnaces sold under Tempstar, Heil, Comfortmaker, and Arcoaire. Confirm the igniter style and connector against your original before installing.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter.
Access — Remove the furnace burner-compartment door.
Document — Photograph the igniter mounting and connector routing.
Remove — Unplug the harness, remove the mounting screw, and lift the cracked igniter out by its ceramic base only.
Install — Seat the new igniter (handle by the base, never the element), secure the screw, and connect the new wiring kit.
Test — Restore power and watch for a full glow and clean burner light-off on the next heat call.

Signs You Need a Replacement

Furnace blower runs but burners never light
Igniter shows a visible crack or no longer glows
Furnace locks out after several failed ignition attempts
Resistance reads open or far out of spec on a multimeter

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS1...

$44.20

Frequently Asked Questions

Does this Igniter fit my ICP RGS150HEAA0AKAA — 120V with Wiring Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS150HEAA0AKAA — 120V with Wiring Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS150HEAA0AKAA — 120V with Wiring Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu