What igniter fits my ICP furnace?

The correct replacement for ICP model RGS150HDBA0AAAA — Furnace Ignitor Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS150HDBA0AAAA — Furnace Ignitor Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS150HDBA0AAAA — Furnace Ignitor Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS150HDBA0AAAA — Furnace Ignitor Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 46.80 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (HSI) is the component that lights the burners on your ICP/Tempstar/Heil RGS150HDBA0AAAA gas furnace. On each heating call the control board sends line voltage to the igniter, which glows to roughly 2,000°F and ignites the gas as it leaves the burners. This listing covers the igniter (OEM 1171306) along with the matching igniter wiring kit (OEM 1188370) for a clean, complete replacement. Hot surface igniters are brittle ceramic elements and are the single most common no-heat failure — they crack from thermal cycling, contamination from oily fingerprints, or simple age. A furnace that runs the inducer and blower but never lights, or that short-cycles on ignition lockout, is the classic symptom of a failed igniter.

Specifications

Spec	Value
Part Numbers	1171306 (Igniter), 1188370 (Wiring Kit)
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil)
Element	Ceramic / Silicon Carbide
Application	Gas Furnace Ignition

Compatibility

Designed for the ICP/Tempstar/Heil RGS150HDBA0AAAA gas furnace and other ICP-family furnaces using this igniter assembly. Confirm igniter mounting bracket and plug style against your existing part.

Installation Guide

Safety First — Shut off gas and disconnect power at the furnace switch, then verify zero voltage with a multimeter.
Access — Remove the furnace burner-compartment door.
Document — Photograph the igniter position and wiring routing before disconnecting.
Remove — Unplug the igniter harness and remove the mounting screw; handle the old element by its base only.
Install — Mount the new igniter without touching the ceramic element, then connect the new wiring kit per your photo.
Test — Restore gas and power, then watch a full ignition cycle to confirm the igniter glows and burners light.

Signs You Need a Replacement

Furnace inducer and blower run but burners never ignite
Visible crack or break in the ceramic element
Igniter does not glow on a heat call
Repeated ignition-lockout / short-cycling on no heat

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS1...

$46.80

Frequently Asked Questions

Does this Igniter fit my ICP RGS150HDBA0AAAA — Furnace Ignitor Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS150HDBA0AAAA — Furnace Ignitor Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS150HDBA0AAAA — Furnace Ignitor Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu