ICP Hot Surface Igniter for RGS121LDCB0AAA — Direct-Fit OEM Ignitor with Wiring Kit | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM hot surface igniter (part #1171306) is the direct-fit ignition source for the ICP / Heil / Tempstar RGS121LDCB0AAA gas furnace. When the thermostat calls for heat, the control board energizes the igniter, which glows to roughly 2,000°F and ignites the gas at the burner. This listing also includes the matching igniter wiring kit (#1188370) so the harness and connector are replaced together for a clean, reliable splice. A failed igniter is one of the most common no-heat causes — the silicon-carbide element is brittle and degrades with every heat cycle until it cracks or stops glowing. Symptoms include the furnace clicking and trying to light but never firing, short cycling on ignition lockout, or no glow visible through the sight port.
Specifications
| Spec | Value |
|---|---|
| Igniter Part Number | 1171306 |
| Wiring Kit Part Number | 1188370 |
| Type | Hot Surface Igniter |
| Brand | ICP / Heil / Tempstar |
| Element | Silicon Carbide |
| Application | Gas Furnace Ignition |
| Fitment | OEM Direct Replacement |
Compatibility
Engineered for the ICP/Heil/Tempstar RGS121LDCB0AAA furnace and shares the same igniter platform used across many Comfortmaker and Heil RGS-series models. Always confirm against your unit's OEM part number before installing.
Installation Guide
- Safety First — Disconnect power at the furnace switch and breaker; shut off the gas. Verify zero voltage with a multimeter.
- Access — Remove the furnace burner/service panel.
- Document — Photograph the igniter bracket and wire routing before disconnecting.
- Remove — Unplug the igniter connector, remove the mounting screw, and lift the old igniter out by the ceramic base — never touch the carbide element.
- Install — Seat the new igniter, secure the screw, and connect using the included wiring kit per your photo.
- Test — Restore gas and power, then watch a full ignition cycle to confirm a steady glow and clean light-off.
Signs You Need a Replacement
- Furnace tries to ignite but never lights, then locks out
- No visible glow at the igniter during a heat call
- Cracked, chipped, or discolored carbide element
- Repeated short cycling on ignition failure
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days