What igniter fits my ICP furnace?

The correct replacement for ICP model RGS121LDBA0AAAA — Furnace Ignition Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS121LDBA0AAAA — Furnace Ignition Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS121LDBA0AAAA — Furnace Ignition Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS121LDBA0AAAA — Furnace Ignition Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 51.94 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (HSI) kit is the ignition component for the ICP Tempstar/Heil RGS121LDBA0AAAA gas furnace. When the furnace receives a call for heat, the control board energizes the igniter, which heats to roughly 1,800–2,500°F and lights the burner gas. The kit combines OEM igniter 1171306 with igniter wiring kit 1188370 so the element and its harness are replaced as a set for a dependable connection. A failed igniter is among the most common "no heat" failures — the inducer runs but the burners never light. Hot surface elements are brittle and wear out with each ignition cycle, making replacement routine furnace maintenance.

Specifications

Spec	Value
Part Number	1171306 (igniter), 1188370 (wiring kit)
Type	Hot Surface Igniter
Brand	ICP (Tempstar / Heil)
Application	Gas Furnace Ignition
Fits Model	RGS121LDBA0AAAA
Includes	Igniter + igniter wiring harness kit

Compatibility

Engineered for the ICP Tempstar/Heil RGS121LDBA0AAAA gas furnace and shared-platform RGS121 series units using the same ignition assembly. Always confirm against your unit's model and serial label before ordering.

Installation Guide

Safety First — Shut off gas and disconnect power at the furnace switch; verify zero voltage with a multimeter.
Access — Remove the burner-compartment service panel.
Document — Photograph the igniter mounting and wire routing before disconnecting.
Remove — Unplug the igniter connector, remove the mounting screw, and lift out the old igniter. Handle by the ceramic base only — never touch the element.
Install — Mount the new igniter, install the new wiring kit, and reconnect per your photo.
Test — Restore gas and power, run a heat cycle, and confirm the igniter glows and burners light promptly.

Signs You Need a Replacement

Furnace runs the inducer but burners never ignite (no heat).
Igniter does not glow, or glows dimly/unevenly.
Visible cracks, blistering, or white spots on the element.
Repeated ignition lockouts after several failed attempts.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS1...

$51.94

Frequently Asked Questions

Does this Igniter fit my ICP RGS121LDBA0AAAA — Furnace Ignition Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS121LDBA0AAAA — Furnace Ignition Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS121LDBA0AAAA — Furnace Ignition Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu