What igniter fits my ICP furnace?

The correct replacement for ICP model RGS121HRCA0AAA — 120V w/ Wiring Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS121HRCA0AAA — 120V w/ Wiring Kit | Ships Today.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

ICP

ICP Hot Surface Igniter for RGS121HRCA0AAA — 120V w/ Wiring Kit | Ships Today

Name: ICP Hot Surface Igniter for RGS121HRCA0AAA — 120V w/ Wiring Kit | Ships Today
Brand: ICP
SKU: 1171306
Price: 42.84 USD
Availability: InStock

SKU: 1171306 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM hot surface igniter (part 1171306) lights the burners in your ICP Tempstar Heil RGS121HRCA0AAA gas furnace. On a call for heat, 120V is applied to the igniter element, which glows white-hot and ignites the gas as it leaves the burner. Included wiring kit (part 1188370) provides the correct connector and harness for a clean replacement. Hot surface igniters are brittle and wear out over time — symptoms include no ignition, a furnace that cycles on the igniter without firing, repeated lockouts, or a visibly cracked, chipped, or no-longer-glowing element.

Specifications

Spec	Value
Part Numbers	1171306 (Igniter), 1188370 (Wiring Kit)
Type	Hot Surface Igniter
Brand	ICP / Tempstar / Heil
Voltage	120 VAC
Application	Gas Furnace Ignition

Compatibility

Built for the ICP / Tempstar / Heil / Comfortmaker RGS121HRCA0AAA furnace and related models using the same ignition system. Handle the element only by its ceramic base — never touch the silicon nitride/carbide element with bare fingers.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker; verify zero voltage with a multimeter.
Access — Remove the burner-compartment service panel.
Document — Photograph the igniter position and harness routing before disconnecting.
Remove — Unplug the igniter connector and remove the mounting screw, then withdraw the fragile element carefully.
Install — Mount the new igniter, attach the wiring kit, and reconnect per your photo without touching the element.
Test — Restore power and confirm the igniter glows and the burners light on a heat call.

Signs You Need a Replacement

No ignition / burners never light
Igniter doesn't glow on a heat call
Visible cracks or chips in the element
Furnace locks out after several ignition attempts

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Hot Surface Igniter for RGS1...

$42.84

Frequently Asked Questions

Does this Igniter fit my ICP RGS121HRCA0AAA — 120V w/ Wiring Kit | Ships Today?

Yes. This is the factory-specified OEM igniter for the ICP RGS121HRCA0AAA — 120V w/ Wiring Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my ICP RGS121HRCA0AAA — 120V w/ Wiring Kit | Ships Today?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu